AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
Standards Australia
Version:
Fifth Edition 2007.
(Current)
Publication date
07-07-2017
Pages
72
Current status
Current
Supersedes
Supersedes: AS 1444-1996 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
Draft Designation: DR 06642Superseded by
Amended by: AS 1444-2007 AMDT 1 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
Reconfirmed by: AS 1444-2007 REC:2017 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
Document Number
1444
Description
Specifies requirements for wrought alloy steels intended for general engineering purposes and is applicable to hot-rolled or cold-finished bars for machines, booms, billets and slabs for forgings, and forgings.
Reconfirmed: 2017-07-07
Originated as part of AS G18-1996, AS G19-1966 and AS G20-1966. Previous edition AS 1444-1996. Fifth edition 2007. Reissued incorporating Amendment No. 1 (February 2008).
Committee
Iron and Steel.
MT-001
Australasian Railway Association; Australian Building Codes Board; Australian Foundry Institute; Australian Industry Group; Bureau of Steel Manufacturers of Australia; Materials Australia.
ISBN
0 7337 8406 2
Attribution
Standards Australia 2007.
Licence
© All Rights Reserved
NSW
VIC
QLD
NT
WA
ACT
TAS
SA
Sector
Residential
Civil
Commercial
Industrial
