AS/NZS 1050.6:1995 Methods for the analysis of iron and steel, Part 6: Determination of tin content - Flame atomic absorption spectrometric method
Standards Australia/Standards New Zealand
Version:
First Edition 1995.
(Current)
Publication date
05-03-1995
Pages
16
Current status
Current
Supersedes
Draft Designation: DR 94246
Superseded by
Reconfirmed by: AS/NZS 1050.6:1995 Rec:2016 Methods for the analysis of iron and steel, Part 6: Determination of tin content - Flame atomic absorption spectrometric method
Document Number
1050
Description
Specifies a flame atomic absorption spectrometric method for the determination of tin content of iron and steel. The sample is digested in acid, the tin extracted into trioctyl phosphine oxide in 4-methylpentan-2-one (MIBK) and then aspirated into a nitrous oxide/acetylene flame of an atomic absorption spectrometer. The absorption is measured at 235.5 nm.
Reconfirmed: 2016-12-16
First published as Joint Standard AS/NZS 1050.6:1995.
Committee
Analysis of Metals.
CH-010
Aluminium Development Council, Australia; Australasian Institute of Mining and Metallurgy; Australian Chamber of Manufactures; Australian Lead Development Association; Bureau of Steel Manufacturers of Australia; Copper Technical Data Centre, Australia; National Association of Testing Authorities, Australia; Railways of Australia Committee; University of New South Wales.
ISBN
0 7262 9539 6
Attribution
Standards Australia/Standards New Zealand 1995.
Licence
© All Rights Reserved
NSW
VIC
QLD
NT
WA
ACT
TAS
SA
Sector
Residential
Civil
Commercial
Industrial
