Search all content

This Standard sets out the method for determining moisture content, dry density and ambient density of masonry units, segmental pavers and flags.

This Standard sets out the method for determining the tensile strength (indirect splitting strength) of masonry units and segmental pavers of most types, sizes and materials. It describes the preparation of the specimens, the conditioning required before testing, the apparatus, the method of test, the method of calculation and the contents of the test report.

This Standard sets out the methods for determining the coefficients of expansion of masonry units, segmental pavers and flags. The coefficients of expansion estimated by these tests represent the total 15 year expansion of either kiln-fresh or non-kiln-fresh fired clay units. Provision is also included for the estimation of past expansion and of residual expansion to 15 years, of units of any age.

This Standard sets out the method for determining the normal consistency of cement.

This Standard lists the Standards for methods of testing Portland and blended cements.

Specifies requirements for gypsum plasterboard intended for use in buildings as a lining material for walls, ceilings and partitions and providing a surface suitable for receiving decorative treatments.

The objective of this Standard is to give guidelines for enhancing an organization’s ability to achieve sustained success. This guidance is consistent with the quality management principles given in AS/NZS ISO 9000:2016.

This Standard sets out methods of sampling masonry units, segmental pavers and flags for testing of a lot, for the test methods given in AS/NZS 4456.2 to AS/NZS 4456.19 inclusive.

AS/NZS ISO 14120:2024 identically adopts and modifies ISO 14120:2015, which specifies general requirements for the design, construction, and selection of guards provided to protect persons from mechanical hazards.

Specifies essential safety requirements for plugs, socket-outlets, cable couplers and appliance couplers for operation at 50 Hz, with a rated voltage not exceeding 660 V and a rated current not exceeding 315 A intended for general industrial use. It is intended to be read in conjunction with AS/NZS 3100.