Search all content

1 - 10 of 102 results
Building permits and other exemptions BP-02 | Amending a building permit 2023 cover

Victorian Building Authority

Version:  2023.  (Current)
This Practice Note provides guidance for building surveyors for amending a building permit in compliance with the Building Act 1993 and the Building Regulations 2018.
Multi-Storey Residential Buildings: Warranty Insurance Exception 2018 cover

Victorian Building Authority

Version:  2018  (Current)
This practice note explains the exception from Domestic Building Insurance (DBI) requirements that applies to builders of multi-storey residential buildings.
Waterproofing of Wet Areas 2023 cover

Victorian Building Authority

Version:  2023.  (Current)
To assist the industry preparing for changes coming in on 1 May 2023, reduce the risk of non-compliant installation of waterproofing systems, and provide an understanding of the key changes for waterproofing for NCC 2022.
Technical Solution Sheet 7.08: Mechanical Services Split System Air conditioner (VIC) 2020 cover

Victorian Building Authority

Version:  2020.  (Current)
Specifies the requirements for the safe discharge of water from a split system air conditioner.
SAHT-Construction-Requirements-for-Class-1A-Buildings 2020 cover

SA Housing Authority

Version:  2020.  (Current)
These requirements are additional to the NATSPEC Simple Domestic specification requirements and if differences in interpretation between the two should arise then these requirements take precedence.
SAHT-Minimum-Design-and-Construction-Specification-for-Class-2-Apartment-Buildings- 2018 cover

SA Housing Authority

Version:  2018.  (Current)
All proposals shall comply with this Minimum Design and Construction Specification (MDCS) together with any additional requirements issued by the Principal with the tender call and any encumbrances, building envelopes, Building Guidelines and Council requirements to which the proposed land is subject.
MICROBIAL CONTROL

NATSPEC

Version:  (Current)
This TECHnote discusses the requirements for microbial control in buildings and how these are addressed in NATSPEC.
MECHANICAL SERVICES PIPE AND VESSEL INSULATION

NATSPEC

Version:  (Current)
This TECHnote addresses the selection of appropriate levels of insulation for piping, vessels and heat exchangers with curved surfaces.
WATER SENSITIVE URBAN DESIGN (WSUD)

NATSPEC

Version:  (Current)
Water sensitive urban design (WSUD) integrates planning and design of the urban water cycle, water supply, waste water, stormwater and groundwater management, urban design and environmental protection.
MECHANICAL DESIGN AND INSTALL HVAC CHECKLIST

NATSPEC

Version:  (Current)
This TECHnote provides a checklist intended to assist the architect or building designer in the assessment of proposals for the design and installation of HVAC systems.