Search all content

Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding; provides test procedures for the determination of resistance to wind force; appendix gives advice on the provision of roof ventilation.

Sets out requirements and means of conformance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

AS/NZS IEC 60079.10.1:2022 adopts IEC 60079 10 1:2020, which specify requirements for the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.

Provides design values of permanent, imposed and other actions to be used in the limit state design of structures and members; intended to be used in conjunction with AS/NZS 1170.0.

This Standard describes the procedure for determining the average tuft length of the pile of a textile floor covering.

This Standard describes the procedure for determining total pile mass per unit area by complete dissection of textile floor coverings. The total pile mass per unit area can be expressed at its equilibrium condition or in terms of clean conditioned mass at agreed commercial allowances.

This Standard sets out the reference method for determining the compressive strength of cement.

This Standard sets out the method for determining the soundness of cement using a paste of normal consistency.

This Standard specifies a method for the measurement of the thickness of pile above the backing of a textile floor covering and is applicable to all textile floor coverings having a pile of cut or looped yarn. Where areas of different construction or thickness exist, these should be tested separately if possible. This method is non-destructive of the floor covering specimen and is useful particularly for production control in manufacture and for measurements on installed carpets.

Specifies methods for the measurement of dimensions and shape for structural LVL.