Search all content

201 - 210 of 504 results
AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements 2013 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2013.  (Current)
Specifies performance requirements for prepainted and organic film/metal laminate products in sheet and strip form that are coated on one or both sides with an organic film, and that are intended for fabrication into products for use in the construction or finishing of buildings.
AS/NZS 2111.5:1996 Textile floor coverings - Tests and measurements, Method 5: Determination of thickness of pile above the substrate 1996 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1996.  (Current)
This Standard specifies a method for the determination of the thickness of pile above the substrate of a textile floor covering. It is applicable to all textile floor coverings with pile capable of being shorn from the substrate, but not to textile floor coverings of varying pile thickness or density, unless the areas can be measured separately.
AS/NZS 1698:2006 Protective helmets for vehicle users 2006 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2006.  (Current)
This Standard specifies requirements for protective headgear for vehicle users, designed to mitigate the adverse effect of a blow to the head. The Standard is written with particular reference to motor cyclists, but is also applicable to users of other types of motor vehicles. Marking requirements and instructions for use and care are also included.
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test, Method 6: Determining impact resistance (falling dart impact test) 1995 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1995.  (Current)
This Standard sets out the method of determining the impact resistance of flat sheet material.
AS/NZS 1158.0:2005 Lighting for roads and public spaces, Part 0: Introduction 2005 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2005.  (Pending Revision)
Serves as a general introduction to the AS/NZS 1158 series and provides definitions of lighting categories and technical terms essential to the understanding of other Standards in the series especially AS/NZS 1158.1.1, 1158.2, 1158.3.1 and 1158.6.
AS/NZS 60335.2.61:2005 Household and similar electrical appliances - Safety, Part 2.61: Particular requirements for thermal-storage room heaters (IEC 60335-2-61 Ed 2.0, MOD) 2005 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2005.  (Current)
This Standard deals with the safety of electric thermal-storage room heaters for household and similar purposes that are intended to heat the room in which they are located, their rated voltage being not more than 250 volt for single-phase appliances and 480 volt for other appliances
AS/NZS 2111.17:1996 Textile floor coverings - Tests and measurements, Method 17: Determination of thickness, compression and recovery characteristics 1996 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1996.  (Current)
This Standard describes a method for measuring the thickness, compression and recovery characteristics of textile floor coverings.
AS/NZS 4782.3:2014 Double-capped fluorescent lamps - Performance specifications, Part 3: Procedure for quantitative analysis of mercury present in fluorescent lamps 2014 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2014.  (Current)
​Specifies sample preparation and test method procedure to determine the mercury content in fluorescent lamps.
AS/NZS 1800:1998 Occupational protective helmets - Selection, care and use 1998 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1998.  (Current)
Incorporates changes adopted in the revision of AS 1801-1981, mostly related to the specification of three different types of occupational protective helmet. Includes new Appendix, summarizing optional or additional requirements that may be requested by the purchaser.
AS/NZS 1050.37:1994 Methods for the analysis of iron and steel, Part 37: Determination of copper content - Flame atomic absorption spectrometric method 1994 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1994.  (Current)
Specifies a flame atomic absorption spectrometric method for the determination of copper content between 0.004 percent and 0.50 percent in steel. This Standard is identical with and reproduced from ISO 4943:1985.