Search all content

Provides requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks. Sets out requirements for design, construction, commissioning and operation of installations for the storage and handling of LP Gas. Separate sections deal with above-ground and underground tanks, piping systems, cylinders and their locations, automotive filling installations, and operations. Appendices cover emergency plans, refuelling, fire protection, leakage testing, hazardous areas, driver instructions and the transport and location of exchange cylinders.

Sets out procedures for the installation of premoulded fibre-reinforced plastic swimming pools complying with the requirements of AS/NZS 1838:1994, for above and below ground locations.

Specifies acceptable solutions for roof, surface and subsoil drainage systems, to the point(s) of connection to the external stormwater drainage network.

Specifies performance requirements for prefabricated and tube-and-coupler scaffolding. It is to be read in conjunction with AS/NZS 1576.1.

Describes methods for sampling and sample preparation for the determination of the chemical composition of pig iron, cast iron and steel. Procedures are described for use with both liquid and solid metal.

Sets out design and operational requirements for scaffolding, except trestle scaffolding, portable ladder intended to be used as working platforms and elevating working platforms.

Specifies requirements for the manufacture, grading and finishing of plywood intended for marine use.

Specifies requirements for the design, material and performance of conventional hearing protectors. Also provides guidance on the general requirements for specialist hearing protectors and procedures for the physical and acoustic testing of such devices.

Sets out requirements for an occupational health and safety management system. The requirements may be used for auditing and certification purposes. The requirements follow the guidelines set out in AS/NZS 4804:2001. In this joint revision the terms 'hazard/risk assessment' and 'control of hazards/risks' are used to accommodate the different terminology used in each country to describe similar elements of the systematic management of occupational health and safety.

Sets out specifications for Australian and New Zealand Steel reinforcing materials (bars, coils and welded mesh). Requirements for chemical, mechanical and physical properties for three different strength grades and the three different ductility classes are also covered.