Search all content

1 - 10 of 102 results
Reduction in workplace exposure standard for respirable crystalline silica: For businesses and workers to minimise risks when working with silica 2020 cover

Workplace Health and Safety Queensland

Version:  2020.  (Current)
The national workplace exposure standard for respirable crystalline silica has been halved from an eight hour time-weighted average airborne concentration of 0.1 milligrams per cubic metre (mg/m3) to 0.05 mg/m3; this new workplace exposure standard takes effect in Queensland from 1 July 2020.
Managing respirable crystalline silica dust exposure in the stone benchtop industry: Code of practice 2019 2019 cover

Workplace Health and Safety Queensland

Version:  2019.  (Current)
Silicosis is preventable by using proper controls to eliminate or minimise expo sure to respirable crystalline silica dust in the workplace.
Spray painting and powder coating 2020 cover

NT WorkSafe

Version:  2020.  (Current)
Provides practical guidance to PCBUs on how to manage health and safety risks associated with spray painting and powder coating.
Welding processes 2020 cover

NT WorkSafe

Version:  2020.  (Current)
Provides practical guidance to PCBUs on how to manage health and safety risks associated with welding processes in their workplace.
Work health and safety consultation, cooperation and coordination 2020 cover

NT WorkSafe

Version:  2020.  (Current)
Provides practical guidance to PCBUs on how to effectively consult with workers who carry out work for the business or undertaking and who are (or are likely to be) directly affected by a health and safety matter.
Silica safety in construction (excluding tunnelling work) 2023 cover

SafeWork NSW

Version:  2023.  (Current)
This following checklist can be used by principal contractors and builders to identify and manage silica dust exposure risks on construction sites.
Safety Checklist: Working at Heights in Construction 2023 cover

SafeWork NSW

Version:  2023.  (Current)
This checklist can be used by persons conducting a business or undertaking, principle contractors, and site supervisors to conduct basic inspections to look for common working at heights hazards.
The pocket guide to ladder safety: For micro and small businesses and subcontractors 2023 cover

SafeWork NSW

Version:  2023.  (Current)
This guide provides useful information for common health and safety issues relating to the use of ladders relevant to New South Wales WHS laws.
Abrasive blasting 2021 cover

Workplace Health and Safety Queensland

Version:  2021.  (Current)
Intended to be read by a person conducting a business or undertaking (PCBU). It provides practical guidance to PCBUs on how to manage health and safety risks associated with abrasive blasting.
Concrete pumping 2019 cover

Workplace Health and Safety Queensland

Version:  2019.  (Current)
Provides practical guidance to persons conducting a business or undertaking on how to comply with their health and safety duties when carrying out construction work involving concrete pumping.