Search all content

331 - 340 of 1302 results
AS 2428.3-2004 Methods of testing smoke/heat release vents, Method 3: Determination of operating characteristics 2004 cover

Standards Australia

Version:  Second Edition 2004.  (Current)
This Standard sets out the method for determining the operating characteristics of a smoke/heat release vent under a specified heat.
AS 2397:2015 Safe use of lasers in the building and construction industry 2015 cover

Standards Australia

Version:  Third Edition 2015.  (Current)
Sets out safety requirements for the use of lasers for alignment, levelling, control and survey tasks in the building and construction industry.
AS 4663-2013 Slip resistance measurement of existing pedestrian surfaces 2013 cover

Standards Australia

Version:  First Edition 2013.  (Pending Revision)
Sets out methods of measuring the frictional characteristics of existing pedestrian surfaces in wet and dry conditions.
AS 5203:2016 Protection of openable windows/fall prevention - Test sequence and compliance method 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
This Standard sets out methods for determining the performance of devices intended to prevent the risk of injury and death associated with accidental falls through open windows by children five years old and younger.
AS 4786.2-2005 Timber flooring, Part 2: Sanding and finishing 2005 cover

Standards Australia

Version:  First Edition 2005.  (Current)
Proposes methods for the sanding and finishing of timber floors including strip flooring and parquet. Information is included for specifiers, on the problems of assessing equilibrium moisture content and on the types of coating systems available..
AS 1141.30.2:2022 Methods for sampling and testing aggregates, Method 30.2: Preparation of aggregate reference specimens for visual comparison 2022 cover

Standards Australia

Version:  Second Edition 2022.  (Current)
AS 1141.30.2:2022 sets out the method for preparing reference specimens that represent each of the visually distinguishable rock types present in a quarried source for use in AS 1141.30.1.
AS 4256.3-2006 Plastic roof and wall cladding materials, Part 3: Glass fibre reinforced polyester (GRP) 2006 cover

Standards Australia

Version:  First Edition 2006.  (Current)
Specifies requirements for general purpose translucent and opaque glass fibre reinforced polyester sheets of flat, corrugated and other geometrical configurations intended for roof and wall cladding materials.
AS 1012.11-2000 Methods of testing concrete, Method 11: Determination of the modulus of rupture 2000 cover

Standards Australia

Version:  Third Edition 2000.  (Current)
This Standard sets out a method for determining the modulus of rupture of concrete testspecimens prepared in accordance with AS 1012.8.2 tested as simple beams with third-pointloading.
AS 1379-2007 Specification and supply of concrete 2007 cover

Standards Australia

Version:  Fourth Edition 2007.  (Pending Revision)
Sets out minimum requirements for the materials, plant and equipment used in the supply of concrete; the production and, if applicable, the delivery of concrete in the plastic state; specifying, sampling, testing and compliance with specified properties of plastic and hardened concrete; and the uniformity of mixing.
AS 1735.7-1998 Lifts, escalators and moving walks, Part 7: Stairway lifts 1993 cover

Standards Australia

Version:  Fifth Edition 1998.  (Current)
Specifies requirements for power-operated stairway lifts intended for use by persons with limited mobility. The lifts consist of a carriage, incorporating a platform, or a chair, or both, for raising or lowering persons along stairways.