Search all content

471 - 480 of 1277 results
AS 15818:2020 Earth-moving machinery - Lifting and tying-down attachment points - Performance requirements (ISO 15818:2017, MOD) 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
Adopts and modifies ISO 15818:2017, which specifies the performance requirements for the lifting and tying-down attachment points of earth-moving machinery as defined in ISO 6165. Applies to components and subassemblies of earth-moving machinery which the manufacturer intends to be lifted or tied down separately by using lifting or tying-down attachment points.
AS 2688:2017 Timber and composite doors 2017 cover

Standards Australia

Version:  First Edition 2017.  (Current)
Sets out requirements for the selection, identification, installation, finishing, and maintenance of timber and composite doors and doorsets for internal and external application.
AS 2796.1-1999 Timber - Hardwood - Sawn and milled products, Part 1: Product specification 1999 cover

Standards Australia

Version:  First Edition 1999.  (Current)
Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and end-matching. Guidance is given on information to be supplied when ordering.
AS 2550.4-2004 Cranes, hoists and winches - Safe use, Part 4: Tower cranes 2004 cover

Standards Australia

Version:  Second Edition 2004.  (Pending Revision)
Specifies requirements for the safe use of tower cranes, covering planning, selection, siting, personnel, inspection, testing, erection, dismantling, personnel safety, operation, maintenance and repair. Appendices provide typical inspection and testing certificates as well as inspection testing check sheets.
AS 4046.3-2002 Methods of testing roof tiles, Method 3: Determination of transverse strength 2002 cover

Standards Australia

Version:  Second Edition 2002.  (Current)
This Standard sets out the method for determining the transverse strength of roof tiles after immersion in water for 24 h.
AS 4046.0-2002 Methods of testing roof tiles, Part 0: Introduction and list of methods 2002 cover

Standards Australia

Version:  Second Edition 2002.  (Current)
Specifies a list of test methods for testing roof tiles used for domestic, commercial or light industrial applications.
AS 1012.14:2018 Methods of testing concrete, Method 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume 2018 cover

Standards Australia

Version:  Third Edition 2018.  (Current)
Sets out a method for the securing, preparing and testing of cylindrical core specimens (cores) from hardened concrete for the determination of compressive strength and mass per unit volume.
AS 2890.3:2015 Parking facilities, Part 3: Bicycle parking 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Specifies a set of minimum requirements for the layout, design and security of bicycle parking facilities for planners and service providers.
AS 4046.4-2002 Methods of testing roof tiles, Method 4: Determination of water absorption 2002 cover

Standards Australia

Version:  Second Edition 2002.  (Current)
This Standard sets out the method for determining the water absorption of roof tiles.
AS 2350.10-2006 Methods of testing portland, blended and masonry cements, Method 10: Acid soluble calcium oxide content of blended cement 2006 cover

Standards Australia

Version:  Third Edition 2006.  (Current)
This Standard sets out the reference method for determining the acid soluble calcium oxide of blended cement and its constituents.