Search all content

The objective of this Test Method is to specify rules for batching, sampling, inspection, and acceptance/rejection of ceramic tiles.

The objective of this Standard is to provide manufacturers and designers of fire detection and alarm systems with requirements for the design and performance of visual warning devices intended to provide supplementary information in fire detection, warning, control and intercom systems.

The objective of this Standard is to define terms and establish classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality). This Standard is not applicable to tiles made by other than normal processes of extrusion or dry pressing. It is not applicable to decorative accessories or trim such as edges, corners, skirting, capping, coves, beads, steps, curved tiles and other accessory pieces or mosaics (i.e. any piece that can fit into a square, the side of which is less than 7 cm).

Sets out the method for the determination of the amount of material finer than 75um in aggregate, by washing.

This Standard sets out a method for an approximate determination of the presence of organic materials, other than sugar, present in fine aggregate.

This Standard sets out requirements for manufactured pozzolans for use as a supplementary cementitious material in concrete, mortar and related applications.

Provides designers, manufacturers, installers and specifiers of culverts with minimum requirements for the design, testing, manufacture and installation of precast reinforced concrete rectangular box culverts not exceeding 1200 mm span and 1200 mm height.

Specifies requirements for perforated plastics pipe and associated fittings designed for use in the drainage of surface and subsurface land, highway and building construction sites.

The objective of this Standard is to specify performance requirements for duct sampling equipment for use in fire detection and alarm systems or smoke control systems conforming with the requirements of AS 1670.1, Automatic fire detection and alarm systems — System design, installation and Commissioning, Part 1: Fire.

AS 3499:2022 specifies requirements for flexible hose assemblies for use with both heated water and cold water supplies with a maximum heated water temperature of 90 °C used for applications above ground and accessible. Nominal sizes range up to DN 50, a maximum length of 10 m and with a working pressure not exceeding 1 400 kPa at 20 °C.