Search all content

1 - 10 of 1307 results
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1905.1:2015 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets 2015 cover

Standards Australia

Version:  Sixth Edition 2015.  (Current)
Sets out requirements for the construction and installation of fire-resistant doorsets that are used to protect openings in walls, and for partitions that are required to resist the passage of fire.
SA HB 84:2018 Guide to concrete repair and protection 2018 cover

Standards Australia

Version:  First Edition 2018.  (Current)
AS 4055:2021 Amd 1:2024 Wind loads for housing 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
AS 4055:2021 is amended as follows. The amendments should be inserted in the locations as instructed.
AS 1684.3:2021 Amd 1:2024 Residential timber-framed construction, Part 3: Cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3 and 8.3.6.5, Figure 6.3, Table 8.18, 9.19 and 9.20, Bibliography.
AS 1684.2:2021 Amd 1:2024 Residential timber-framed construction, Part 2: Non-cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3, 8.3.6.5, Figure 6.3, Tables 8.18, 9.19 and 9.20, Bibliography.
AS 4254.1:2021 Ductwork for air-handling systems in buildings, Part 1: Flexible duct 2021 cover

Standards Australia

Version:  Second Edition 2021.  (Current)
Provides standardized requirements for the performance testing, manufacture and installation of flexible ducts.
Preparing a crystalline silica hazard control statement for high risk crystalline silica work 2022 cover

WorkSafe Victoria

Version:  2022.  (Current)
How and when to prepare and use a crystalline silica hazard control statement (hazard control statement) for high risk crystalline silica work (HRCSW).
Reduction in workplace exposure standard for respirable crystalline silica: For businesses and workers to minimise risks when working with silica 2020 cover

Workplace Health and Safety Queensland

Version:  2020.  (Current)
The national workplace exposure standard for respirable crystalline silica has been halved from an eight hour time-weighted average airborne concentration of 0.1 milligrams per cubic metre (mg/m3) to 0.05 mg/m3; this new workplace exposure standard takes effect in Queensland from 1 July 2020.
Managing respirable crystalline silica dust exposure in the stone benchtop industry: Code of practice 2019 2019 cover

Workplace Health and Safety Queensland

Version:  2019.  (Current)
Silicosis is preventable by using proper controls to eliminate or minimise expo sure to respirable crystalline silica dust in the workplace.