Search all content

This Standard sets out a method to determine the resistance of roof tiles to freeze/thaw.

Specifies requirements for the design and installation of reinforced concrete structures used for retaining liquids at ambient temperatures. This Standard is limited to concrete with ultimate compressive strength in the range 20 MPa to 50 MPa at 28 days. For these structures, This Standard supplements and takes precedence over the requirements of AS 3600, Concrete structures.

AS 1141.23:2021 sets out the procedure for the determination of the loss, on abrasion, of aggregate particles by means of the Los Angeles abrasion testing machine. The test is applied to aggregate particles from crushed rock, gravel or crushed slag, or to crushings derived from rock spalls or drill cores. The maximum particle size is between 53 mm and 9.5 mm.

This Standard specifies requirements and gives recommendations for the design and use of direction signs and related navigational aids including route numbering for all roads including expressway type roads.

AS 2208:2023 sets out set out test requirements for safety glazing for use in buildings. The test requirements for the different glazing materials are designed to promote safety and to reduce or minimize the likelihood of cutting and piercing injuries. The types of safety glazing materials covered are laminated, toughened, organic-coated and organic-backed safety mirrors

AS 2890.6:2022 specifies minimum requirements for the provision of off-street parking facilities for people with disabilities.

This Standard specifies Minimum Energy Performance Standard (MEPS) requirements for double-capped (FD and FDH) tubular fluorescent lamps with a nominal length of 550 mm to 1500 mm and having nominal lamp wattage of 16 W or more, that are within the scope of AS/NZS 4782.1.

Sets out the requirements for chemical admixtures to be added to concrete mixes incorporating portland and blended cements.

Specifies general requirements for the construction of sports ground fencing for a range of alternative types and design options.

The objective of this Test Method is to specify a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.