Search all content

The objective of this Standard is to provide manufacturers and designers of fire detection and alarm systems with requirements for the design and performance of visual warning devices intended to provide supplementary information in fire detection, warning, control and intercom systems.

The objective of this Test Method is to specify rules for batching, sampling, inspection, and acceptance/rejection of ceramic tiles.

The objective of this Standard is to define terms and establish classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality). This Standard is not applicable to tiles made by other than normal processes of extrusion or dry pressing. It is not applicable to decorative accessories or trim such as edges, corners, skirting, capping, coves, beads, steps, curved tiles and other accessory pieces or mosaics (i.e. any piece that can fit into a square, the side of which is less than 7 cm).

Sets out test procedures for a method of test for determining the smoke leakage through doors and shutters. Follows the basic principles and provisions contained in ISO 5925-1.

AS 1141.30.1 sets out the method for determining a quality classification of coarse aggregate by visual comparison with pre-prepared reference specimens.

This Standard sets out the method for the determination of particle size distribution in coarse and fine aggregates by vision sizing systems (VSS). The VSS is limited by the discrimination of the optical system and, at present, is suitable for materials coarser than 1.18 mm.

Sets out requirements for power-operated inclined lifts of the car or platform type for public and private use, other than stairway lifts, temporary lifts, or hoists used solely for building work, and amusement devices.

This Standard sets out the method for determining water soluble chromate in portland cement.

Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and end-matching. Guidance is given on information to be supplied when ordering.

Specifies product information to be included with and test and performance requirements for prefabricated and tube-and-coupler scaffolding.