Search all content

491 - 500 of 1247 results
AS 1682.2:2015 Fire, smoke and air dampers, Part 2: Installation 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Specifies requirements for the selection, installation and commissioning of fire, smoke and air dampers complying with AS1682.1.
AS 2350.9-2006 Methods of testing portland, blended and masonry cements, Method 9: Determination of residue on the 45 μm sieve 2006 cover

Standards Australia

Version:  Third Edition 2006.  (Current)
This Standard sets out the method for determining the residue of cement on the 45 µm sieve, by wet sieving.
AS 2610.2-2007 Spa pools, Part 2: Private spas 2007 cover

Standards Australia

Version:  Third Edition 2007.  (Current)
Specifies requirements for design, construction and operation of private spa pools based on safety and health considerations. Appendices include chemical operational parameters and spa heater sizing for outdoor installations.
AS 1141.54:2018 Methods for sampling and testing aggregates, Method 54: Foreign material in crushed recycled concrete for use in pavements 2018 cover

Standards Australia

Version:  First Edition 2018.  (Current)
This Standard sets out the method for determining by visual examination the amount of foreign material in coarse aggregate produced from recycled concrete aggregate.
AS 1012.9:2014 Methods of testing concrete, Method 9: Compressive strength tests - Concrete, mortar and grout specimens 2014 cover

Standards Australia

Version:  Fourth Edition 2014.  (Current)
This Standard sets out the method for determining the compressive strength of concrete test specimens prepared in accordance with the provisions of AS 1012.8.1, AS 1012.8.3, AS 1012.14 or AS 1012.19.
AS 1742.12:2017 Manual of uniform traffic control devices, Part 12: Bus, transit, tram and truck lanes 2017 cover

Standards Australia

Version:  Third Edition 2017.  (Current)
Specifies the traffic control devices required to designate traffic lanes as bus lanes, bus only lanes, transit lanes, tram lanes, tram only lanes or truck lanes. It also specifies devices for the control or prohibition of truck or bus traffic where required on roadways.
AS ISO 10007:2017 Quality management - Guidelines for configuration management 2017 cover

Standards Australia

Version:  Second Edition 2017.  (Current)
Adopts ISO 10007:2017 to provide guidance on the use of configuration management within an organization. It is applicable to the support of products and services from concept to disposal.
AS 4046.1-2002 Methods of testing roof tiles, Method 1: Determination of distortion 2002 cover

Standards Australia

Version:  Second Edition 2002.  (Current)
This Standard sets out the method for determining the distortion of roof tiles.
AS 2350.14-2006 Methods of testing portland, blended and masonry cements, Method 14: Length change of cement mortars exposed to sulfate solution 2006 cover

Standards Australia

Version:  Second Edition 2006.  (Current)
This Standard sets out the method for determining the length change of mortar bars, of defined composition, immersed in a sodium sulfate solution. The length change is taken as a measure of the sulfate resistance of cement.
AS 3990-1993 Mechanical equipment - Steelwork 1993 cover

Standards Australia

Version:  First Edition 1993.  (Current)
Applies to the design, fabrication, erection, repair and alteration of steelwork associated with boilers, pressure vessels, lifts, cranes, mining equipment, gas and liquid petroleum piping systems, bulk handling equipment, and the like in accordance with the working stress design method, but does not apply to road and rail bridges, material less than 3 mm thick, steel for which the design yield stress exceed 450 MPa, and cold-formed members other than those complying with AS 1163.