Search all content

Provides minimum performance requirements and specifications for the manufacture and application of plywood for use in the specific application of concrete formwork in Australia.

Specifies grid protection requirements for inverter energy systems with ratings up to 10 kVA for single-phase, or 30 kVA for three-phase, systems and intended for connection to the low-voltage electricity distribution network (grid).

Specifies the facilities and functions which must be provided to enable a system to identify a fire condition, control fire warning and suppression systems, and transmit an alarm signal to a remote receiving station. Mechanical and electrical performance requirements are detailed in addition to the form and content of the operator's manual.

This Standard sets out methods of test for the installation of hinged and sliding security screen doors and security window grilles used primarily in residential situations.

This Standard sets out a method for determining the methylene blue adsorption value (MBV) for fine aggregate and mineral fillers. This method applies to aggregate of less than 5 mm nominal size and may be used for both natural and manufactured sands.

This Standard sets out the method for determining a quality classification of coarse aggregate by visual comparison with pre-prepared reference specimens.

This Standard specifies requirements for visual stress grading of sawn softwood intended for structural purposes at the time of grading.

Specifies requirements for the layout, design and security of bicycle parking facilities in any location, either on-street or off-street. Appendices give examples of bicycle parking hardware and examples of parking arrangements on footpaths.

The objective of this Standard is to standardize the user interface between the firefighter and the control and indicating equipment (c.i.e.) (fire indicator panel), to assist in initial training and ongoing skills maintenance for firefighters from both career and volunteer fire brigades, and to facilitate fire brigade intervention where monitored fire and smoke detection and alarms system are installed as required by the Building Code of Australia (BCA).