Search all content

Specifies essential safety requirements for plugs, socket-outlets, cable couplers and appliance couplers for operation at 50 Hz, with a rated voltage not exceeding 660 V and a rated current not exceeding 315 A intended for general industrial use. It is intended to be read in conjunction with AS/NZS 3100.

Specifies methods for sampling and testing timber for moisture content by oven drying and by use of an electrical resistance moisture meter. Correction figures for a large number of Australian, New Zealand and imported species, seasoned, unseasoned and treated, are provided.

This Standard describes the method for determining the withdrawal force required to remove tufts from a textile floor covering.

This Standard describes the procedure for determining total pile mass per unit area by complete dissection of textile floor coverings. The total pile mass per unit area can be expressed at its equilibrium condition or in terms of clean conditioned mass at agreed commercial allowances.

This Standard specifies a method for the measurement of the thickness of pile above the backing of a textile floor covering and is applicable to all textile floor coverings having a pile of cut or looped yarn. Where areas of different construction or thickness exist, these should be tested separately if possible. This method is non-destructive of the floor covering specimen and is useful particularly for production control in manufacture and for measurements on installed carpets.

This Standard specifies the requirements for the quantity and size of the test specimens required in the AS/NZS 4347 suite of Standards.

This Standard sets out the method for determining the quality of bond in plywood.

Describes methods and provisions to be complied with for taking samples of cement representative of given lots for testing to assess the quality of products prior to, during or after delivery.

This Standard describes the procedure for determining the mass per unit area of surface pile, which can be cut from above the substrate of a textile floor covering. The surface pile mass per unit area can be expressed at its equilibrium condition or in terms of clean conditioned mass at agreed commercial allowances.

This Standard describes the procedure for determining the mass per unit area of a textile floor covering in its entirety.