Search all content

1 - 10 of 21 results
AS 1191-2002 Acoustics - Method for laboratory measurement of airborne sound transmission insulation of building elements 2002 cover

Standards Australia

Version:  Third Edition 2002.  (Current)
Provides a method for the measurement of airborne sound reduction index to building partitions such as walls, floor/ceiling assemblies, doors, windows and other space dividing elements.
AS/NZS 2107:2016 Acoustics - Recommended design sound levels and reverberation times for building interiors 2016 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2016.  (Current)
Recommends design criteria for conditions affecting the acoustic environment within building interiors to ensure a healthy, comfortable and productive environment for the occupants and the users.
AS/NZS ISO 22846.1:2020 Personal equipment for protection against falls - Rope access systems, Part 1: Fundamental principles for a system of work 2020 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2020.  (Current)
This Standard adopts ISO 22846-1:2003, which gives the fundamental principles for the use of rope-access methods for work at height; intended for use by employers, employees and self-employed persons who use rope-access methods, by those commissioning rope-access work and by rope-access associations.
AS 1892.5:2020 Portable ladders, Part 5: Selection, safe use and care 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
Sets out the minimum requirements and recommended safe practices for the selection, use and maintenance of portable ladders.
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
Specifies requirements for general installation and safety requirements for battery energy storage systems (BESSs), where the battery system is installed in a location, such as a dedicated enclosure or room, and is connected with power conversion equipment (PCE) to supply electric power to other parts of an electrical installation.
AS/NZS 5033:2021 Installation and safety requirements for photovoltaic (PV) arrays 2021 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2021.  (Current)
Sets out general installation and safety requirements for electrical installations of PV arrays, including d.c. array wiring, electrical protection devices, switching and earthing provisions.
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices, Part 4: Selection, use and maintenance 2009 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2009.  (Pending Revision)
Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses, horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings.
AS ISO 717.2:2024 Acoustics - Rating of sound insulation in buildings and of building elements, Part 2: Impact sound insulation 2024 cover

Standards Australia

Version:  Second Edition 2024.  (Current)
AS ISO 717.2:2024 identically adopts ISO 717 2:2020, which provides a method whereby the frequency dependent values of impact sound insulation of building elements and in buildings (from both laboratory and field measurements) can be converted into a single number to characterize the acoustical performance
AS ISO 717.1:2024 Acoustics - Rating of sound insulation in buildings and of building elements, Part 1: Airborne sound insulation 2024 cover

Standards Australia

Version:  Second Edition 2024.  (Current)
AS ISO 717.1:2024 identically adopts ISO 717 1:2020, which provides a method whereby the frequency dependent values of airborne sound insulation of building elements and in buildings (from both laboratory and field measurements) can be converted into a single number to characterize the acoustical performance
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions 2017 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2017.  (Pending Revision)
Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.