Search all content

1 - 10 of 26 results
AS 1684.3:2021 Amd 1:2024 Residential timber-framed construction, Part 3: Cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3 and 8.3.6.5, Figure 6.3, Table 8.18, 9.19 and 9.20, Bibliography.
AS 1684.2:2021 Amd 1:2024 Residential timber-framed construction, Part 2: Non-cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3, 8.3.6.5, Figure 6.3, Tables 8.18, 9.19 and 9.20, Bibliography.
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements 2005 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2005.  (Current)
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage.
AS 2444-2001 Portable fire extinguishers and fire blankets - Selection and location 2001 cover

Standards Australia

Version:  Sixth Edition 2001.  (Current)
Specifies the criteria for the selection of portable fire extinguishers and the requirements for their application, location and distribution.
AS 1720.5:2015 Timber structures, Part 5: Nailplated timber roof trusses 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out requirements for the design of nailplated timber roof trusses for residential and similar building applications in accordance with AS1720.1, AS4055 and the AS(/NZS)1170 series.
AS 1720.3:2016 Timber structures, Part 3: Design criteria for timber-framed residential buildings 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Part of the AS 1684 series, sets out the design methods, assumptions and other criteria, including uplift forces and racking pressures, suitable for the design of timber-framed buildings constructed within the limitations and parameters of, and using the building practice described in, AS 1684.2, AS 1684.3 and AS 1684.4.
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
Specifies requirements for general installation and safety requirements for battery energy storage systems (BESSs), where the battery system is installed in a location, such as a dedicated enclosure or room, and is connected with power conversion equipment (PCE) to supply electric power to other parts of an electrical installation.
AS/NZS 5033:2021 Installation and safety requirements for photovoltaic (PV) arrays 2021 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2021.  (Current)
Sets out general installation and safety requirements for electrical installations of PV arrays, including d.c. array wiring, electrical protection devices, switching and earthing provisions.
AS 1670.3:2024 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 3: Fire alarm monitoring 2024 cover

Standards Australia

Version:  Fourth Edition 2024.  (Current)
The objective of this Standard is to achieve the reliable monitoring of fire detection and alarm systems (FDAS) installed in buildings by a remotely located monitoring service and to transfer required signals to a fire dispatch centre.
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions 2017 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2017.  (Pending Revision)
Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.