Search all content

Specifies requirements for the design, fabrication, erection and stripping of formwork as well as the evaluation and repair of the formed concrete surface; colour evaluation charts are included in an Appendix.

The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.

Sets out requirements for the classification of a site and the design and construction of a footing system for a single dwelling house, town house or the like which may be detached or separated by a party wall or common wall but not situated vertically above or below another dwelling.

Specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment, and establishes procedures for the operation, maintenance, and repair of refrigerating systems and the recovery of refrigerants.

Sets out a hot smoke test methodology by means of which a specified quantity of smoke may be generated, at a safe temperature, within a building.

Outlines a performance-based approach to the maintenance of cooling water systems with respect to the control of microorganisms, including Legionellae, within such systems. This approach combines automatically regulated water treatment with monitoring, assessment and control strategies to help create a low risk environment within the cooling water system.

This Standard provides an unambiguous system for assigning designations to refrigerants. It also establishes a system for assigning a safety classification to refrigerants based on toxicity and flammability data, and provides a means of determining the refrigerant concentration limit.

Specifies requirements for the performance and construction of air filters for use in general ventilation and airconditioning systems. It classifies air filters on the basis of design, construction performance and application and establishes minimum criteria for acceptance of an air filter into a particular category. It does not apply to HEPA filters.

Specifies the classification of smoke-spill fans, and the laboratory test methods and procedures used to rate their performance (and that of their motors). Fans are rated in terms of their suitability to operate continuously without significant loss of performance, for a specified time at a specified air temperature. This Standard deals only with laboratory type-testing and does not consider the testing of smoke-spill fans after they have been installed in a building.