Search all content

171 - 180 of 249 results
AS 1271-2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels 2003 cover

Standards Australia

Version:  Fifth Edition 2003.  (Current)
Specifies requirements for the design, construction and testing of safety valves, other valves, liquid relief valves, liquid level gauges, blowdown valves and other fittings for use on boilers and unfired pressure vessels and their associated piping.
AS 1397:2021 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium 2021 cover

Standards Australia

Version:  Seventh Edition 2021.  (Current)
Specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.
AS 1926.3-2010 Swimming pool safety, Part 3: Water recirculation systems 2010 cover

Standards Australia

Version:  Third Edition 2010.  (Current)
Sets out requirements for skimmer boxes and other permanent water outlets in swimming pools and spas.
AS 2419.1:2021 Fire hydrant installations, Part 1: System design, installation and commissioning 2021 cover

Standards Australia

Version:  Sixth Edition 2021.  (Current)
Specifies requirements for the design, installation and commissioning and testing of fire hydrant installations that are used for the protection of buildings, structures, storage yards, marinas and associated moored vessels, wharves, and plant.
AS/NZS 1170.2:2021 Structural design actions, Part 2: Wind actions 2021 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2021.  (Current)
Sets out procedures for determining wind speeds and resulting wind actions to be used in the structural design of structures subjected to wind actions other than those caused by tornadoes. To be read in conjunction with AS/NZS 1170.0.
AS 1668.1:2015 The use of ventilation and air conditioning in buildings, Part 1: Fire and smoke control in buildings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out minimum requirements for the design, construction, installation and commissioning of mechanical smoke control systems in buildings; specific methods of smoke control are defined and the appropriate requirements specified for each.
AS 4100:2020 Steel structures 2020 cover

Standards Australia

Version:  Third Edition 2020.  (Pending Revision)
Specifies minimum requirements for the design and the engineering aspects of fabrication and erection, and modification of steelwork in structures in accordance with the limit states design method.
AS 4773.2:2015 Masonry in small buildings, Part 2: Construction 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Pending Revision)
Specifies requirements for construction practices for masonry in buildings of Class 1 and Class 10a, as defined in the National Construction Code (NCC), designed in accordance with AS 4773.1 and to be constructed from clay, concrete, or calcium silicate masonry units.
AS 3740:2021 Waterproofing of domestic wet areas 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
Sets out minimum requirements for the materials, design and installation of waterproofing for domestic wet areas in Class 1, Class 2 and Class 4 buildings as defined in the NCC. It also applies to wet areas within Class 3 to 9 buildings as if it were a Class 2 or 4 part of a building.
AS 5146.3:2018 Reinforced Autoclaved Aerated Concrete, Part 3: Construction 2018 cover

Standards Australia

Version:  Second Edition 2018.  (Current)
Sets out requirements for construction using Reinforced Autoclaved Aerated Concrete (Reinforced AAC) members conforming with AS 5146.1 and AS 5146.2, including associated fixings, flashings and control joints; does not cover the construction of structures consisting of unreinforced autoclaved aerated concrete blocks.