Search all content

Sets out requirements for the safety aspects, construction, testing and certification, operation and maintenance of non-flammable medical gas pipeline systems used for patient care, operating surgical tools, and therapeutic and diagnostic purposes; the supply of oxygen from pressure swing absorption, oxygen concentrators and similar techniques is not covered in this Standard; the supply of synthetic air from proportioning units is not covered in the Standard.

Specifies requirements for the suitability of products for use in contact with drinking water, with regard to their effect on the quality of water.

Provides methods for determining the performance of external construction elements when exposed to radiant heat, burning embers and burning debris.

The 2018 edition of AS 1530.8.1 is amended as follows; the amendments should be inserted in the appropriate places.

Specifies domestic washing and drying procedures for textile testing; procedures are applicable to textile fabrics, garments or other textile articles which are subjected to appropriate combinations of domestic washing and drying procedures.

Sets out the procedure for determining the resistance of a soil to penetration by a flat ended rod of 16 ±0.2 mm diameter driven with a 9 kg mass, dropping 600 mm; use of the method is limited to granular soils with a maximum particle size not exceeding 2 mm, and a layer thickness of at least of 450 mm.

Provides the building industry with procedures that can be used to determine building practice, to design or check construction details, and to determine member sizes, and bracing and fixing requirements for timber-framed construction in cyclonic areas.

Sets out minimum requirements for the design, fabrication, erection, and modification of steelwork in structures in accordance with the limit states design method

Sets out requirements for passenger lifts which are specifically designed to assist persons with disabilities.

Provides a computational method for determining the fire resistance of solid and glued-laminated structural timber members (for the purpose of structural adequacy) as an alternative to the test method specified in AS 1530.4.