Search all content

… Zealand Standard™ Personal equipment for protection against falls — Rope access systems Part 2: Code of practice …

Page 1

Page 3

… Zealand Standard™ Personal equipment for protection against falls — Rope access systems Part 2: Code of practice Originated as AS/NZS 4488.2:1997. Jointly revised and redesignated as AS/NZS ISO …

… Industrial rope access systems, Part 2: Selection, use and maintenance. The objective of this Standard is to provide recommendations and guidance on the use of rope access methods … 22846‑2:2012, Personal equipment for protection against falls — Rope access systems — Part 2: Code of practice. As this document has been reproduced from an International Standard, the following …

Page 7

… v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards … falls — Rope access systems: — Part 1: Fundamental principles for a system of work — Part 2: Code of practice © Standards Australia Limited/Standards New Zealand 2020 …

… ISO 22846.2:2020 Personal equipment for protection against falls — Rope access systems Part 2: Code of practice 1 Scope This part of ISO 22846 provides recommendations and guidance on the use of rope …

Page 36

… are in place prior to the work beginning; 4) pre-planned response methods, including methods of contacting required rescue services and methods of guiding rescue services to the correct … suspended access equipment, it is intended that reference be made to the appropriate codes of practice and standards. 7.5 Specific techniques commonly used in rope access (non-exhaustive) …

Workplace amenities and work environment 1st edition, 2008. cover

Name

Workplace amenities and work environment

Publisher

WorkSafe Victoria

Version: 1st edition, 2008. (Current)

Provides practical guidance to those who have duties under the Occupational Health and Safety Act 2004 (the OHS Act) or Occupational Health and Safety Regulations 2007 (the Regulations) on how to comply with those duties or obligations.

6 results

… 26. Workplace amenities need to be maintained so that they continue to meet the needs of employees. This means they need to be hygienic, safe, secure and in serviceable condition. … consulting the affected employees and HSRs. Reviews also need to be done when: • • • • work practices, equipment or workplaces are modified more employees are engaged new work processes … and facilities. For example, new buildings and major renovations must comply with the Building Code of Australia. It specifies, amongst other things, the number of toilets that need to be …

Page 24

… 114. Sufficient clear space needs to be allocated to ensure employees have the full range of movement required to do the job and can move without strain or injury. 115. The space … to ensure that workplaces that are buildings comply with the space allocation in the Building Code of Australia, table D1.13 Area per person according to use. Further information on workspace can be found in WorkSafe’s Code of practice for manual handling. 22 Compliance code / Workplace amenities and work environment …

Page 32

… 154. WorkSafe’s Communicating occupational health and safety across languages compliance code contains practical advice to employers in providing information to employees in languages … employees, managers and supervisors are instructed and trained in the procedures and regular practice runs of all relevant procedures are held. Emergency response features and equipment 156. Employers …

Page 35

… Appendices Appendix B – Consultation By law, employers must consult with employees on a range of matters that directly affect (or are likely to directly affect) their health and safety, so … – the work performed at the workplace doing any other thing prescribed by the Regulations. In practice, this means that when planning to implement measures identified in this compliance code, or when making decisions to implement alternative measures to those specified in this …

Page 37

… Appendices Appendix D – Documents associated with this compliance code The Australian Standards and other references listed below are not incorporated into this compliance code. This means that they do not form part of this compliance code, although they may have regulatory status in their own right. They are … and Safety Regulations 2007 Health (Legionella) Regulations 2001 WorkSafe publications Code of practice for manual handling Compliance code – Communicating occupational health and safety …

Page 46

… regularly, at least daily? Are amenities and facilities reviewed periodically eg when work practices or workplaces are modified, more employees are engaged, new work processes are introduced or an incident impacting on the health, safety or welfare of employees occurs? 44 Compliance code / Workplace amenities and work environment WorkSafe Victoria …

Name

Excavation

Publisher

WorkSafe Victoria

Version: 2nd edition, 2019. (Current)

Provides practical guidance for those who have duties or obligations in relation to excavation sites under the Occupational Health and Safety Act 2004 (OHS Act) and Occupational Health and Safety Regulations 2017 (OHS Regulations).

6 results

… Preface This compliance code (Code) provides practical guidance for those who have duties or obligations in relation to … 2017 (OHS Regulations). The Code was developed by WorkSafe Victoria (WorkSafe). Representatives of employers and employees were consulted during its preparation. It was made under the OHS Act … Regulations should use the Code together with this legislation. This Code replaces the Code of Practice (No.8) – Safety precautions in trenching operations (1988), which is no longer in force …

… 22. It is important to consult with your employees as early as possible at each step of the risk management process, including when planning to: matters over which the employer has … a way that is safe and without risks to health. This should include correcting any unsafe work practices as soon as possible. 31. Where the employees undertaking the work are new and … contractor) engaged by the employer in relation to WorkSafe Victoria Excavation compliance code 7 …

Page 15

… Part 2 – Overview of the risk management process Note: In addition to the above hierarchy of control for … 54. 57. Part 2.4 – Review and revision of risk controls 58. Parts 4 to 6 of this Code provide information about risk controls for excavation work. 56. A person who is required … Maintenance of risk controls needs to include: • monitoring excavation activities and work practices • regular inspections of physical controls such as trench shields and shoring or …

Page 22

… Part 3 – Planning excavation work • the provision of first aid to a person who has become engulfed. OHS Regulations r331(3)(a) 102. The employer … do not respond, are delayed or are unable to deal with the emergency. 20 Excavation compliance code 106. Employers must provide information, instruction and training to employees as is … Employers should include such training as part of the site specific induction training. Regular practice runs of all relevant procedures should be held. 107. An employer should not assume that …

Page 44

… Part 6 – Reducing the risk of ground collapse 210. The ideal placement for a trench shield is when it rests on the bottom … was designed to withstand. Earth pressures are reduced when correct benching and battering practices are used. Figure 16 provides an example of a trench shield placed in a slope battered … lifting equipment or load. Figure 16 – Shield in slope battered trench 42 Excavation compliance code WorkSafe Victoria …

Page 57

… Part 6 – Reducing the risk of ground collapse 261. Method 2 – With this method (see Figures 29a and 29b), backfilling progresses from one end of the excavation to the other. This is useful practice when the excavation has restricted access. 262. Backfill is placed in the excavation … 29a – Removing solider set ground supports, method 2 WorkSafe Victoria Excavation compliance code 55 …

Hazardous manual handling 2nd edition, 2019. cover

Name

Hazardous manual handling

Publisher

WorkSafe Victoria

Version: 2nd edition, 2019. (Current)

Provides practical guidance for those who have duties or obligations in relation to hazardous manual handling under the Occupational Health and Safety Act 2004 (OHS Act) and Occupational Health and Safety Regulations 2017 (OHS Regulations).

2 results

… Preface This compliance code (Code) provides practical guidance for those who have duties or obligations in relation to … 2017 (OHS Regulations). The Code was developed by WorkSafe Victoria (WorkSafe). Representatives of employers and employees were consulted during its preparation. It was made under the OHS Act … Regulations should use the Code together with this legislation. This Code replaces the Code of Practice (No. 25) – Manual Handling (2000), which is no longer in force and effect. While the …

Page 43

… Part 5 – Review and revision of risk control measures 127. Employers should consider and consult with employees and HSRs on … • relevant reputable technical standards (for example, Australian Standards) • industry practice • associations (industry, employer, employee, professional and trade unions) c) Review … which perform the same or similar work. WorkSafe Victoria Hazardous manual handling compliance code 41 …

Name

Demolition

Publisher

WorkSafe Victoria

Version: 2nd edition, 2019. (Current)

Provides practical guidance for those who have duties or obligations in relation to demolition sites under the Occupational Health and Safety Act 2004 (OHS Act) and Occupational Health and Safety Regulations 2017 (OHS Regulations).

4 results

… Preface This compliance code (Code) provides practical guidance for those who have duties or obligations in relation to … 2017 (OHS Regulations). The Code was developed by WorkSafe Victoria (WorkSafe). Representatives of employers and employees were consulted during its preparation. It was made under the OHS Act … Regulations should use the Code together with this legislation. This Code replaces the Code Of Practice (No.14) – Demolition (1991), which is no longer in force and effect. While the guidance …

… represented by an HSR, the consultation must involve that HSR (with or without the involvement of the employees directly). If the employer and the employees have agreed to procedures for … a way that is safe and without risks to health. This should include correcting any unsafe work practices as soon as possible. 31. Where the employees undertaking the work are new and … implemented. Information, instruction, training and supervision 26. 28. Demolition compliance code 7 …

Page 15

… Part 2 – Overview of the risk management process Maintaining risk controls 52. 53. A person who is required by the … demolition work becomes available to the employer • monitoring demolition activities and work practices • frequent inspections of physical controls such as guards or scaffolding • if, for … risk during their review of control measures). OHS Regulations r326(2) Demolition compliance code 13 …

Page 22

… the principal contractor at a demolition workplace need to inform all persons at the workplace of the presence of hazardous materials, and arrange for the safe removal and disposal of the … risks where there are hazardous materials present. See the Hazardous substances compliance code and the Code of practice for the storage and handling of dangerous goods at worksafe.vic.gov.au for specific …

Name

Foundries

Publisher

WorkSafe Victoria

Version: 1st edition, 2008. (Current)

Provides practical guidance to those who have duties under the Occupational Health and Safety Act 2004 (the OHS Act) or Occupational Health and Safety Regulations 2007 (the Regulations). It shows how to comply with those duties or obligations.

13 results

… Introduction • employers must instruct employees in fire-fighting procedures, the use of fire-fighting equipment, and what to do in the event of a molten metal spill • employers must … to make the workplace safe. Controlling OHS hazards and risks 13. Good health and safety practice requires the elimination and control of hazards and risks. This is best achieved by a … refer to WorkSafe’s Controlling OHS hazards and risks – A handbook for workplaces. 4 Compliance code / Foundries WorkSafe Victoria …

Page 6

Page 14

… a poison that accumulates in the body. It enters the body by ingestion and inhalation. Symptoms of lead exposure include headaches, tiredness, irritability, constipation, nausea, stomach pains … duty holders must also comply with Part 4.4 (Lead) of the Regulations, and the compliance code for lead. Duty holders must also be able to demonstrate the implementation of controls to … exposure time); restricting employee access to process areas; preventing dry sweeping; work practices and equipment produce a minimum of residue • task specific protective clothing and …

Page 29

… cracked or suspect metal is added to a furnace with a dry hearth • s ealed or closed sections of scrap and charge that may contain moisture or contaminant are opened • c lose-packed blocks … required or not recommended. In all cases, the alloy supplier needs to be consulted for correct practices for addition to metal. 81. Where a substance is to be introduced to molten metal, such … is aware of and fully trained in the hazards of adding substances. WorkSafe Victoria Compliance code / Foundries 27 …

Page 31

… metal 85. Precautions need to be taken when moving molten metal around the foundry, regardless of how much metal is being moved. 86. Putting a lid on the transfer vessel when practical is a … to prevent accidental tilting • w here ladles are carried by hand, safe manual handling practices such as two-person lift, safe-grip points and other ergonomic considerations are … before use to remove any moisture absorbed from the atmosphere. WorkSafe Victoria Compliance code / Foundries 29 …

Page 32

… metal Moving molten metal with a forklift 87. Using a forklift to move crucibles or receptacles of molten metal is a common practice in many foundry operations. To control the risks, employers need to ensure that: • f … through their breathing zone • primary PPE is worn by employees (see page 35). 30 Compliance code / Foundries WorkSafe Victoria …

Page 34

… Working with molten metal Housekeeping After casting 93. When casting is complete, a number of tasks need to be done to ensure the foundry is safe for the next casting process. To control … or the body. Also see page 9. To control the risks, employers need to ensure that: • work practices and equipment produce a minimum of residue • plant, fixtures and structures are … dry and off the floor in suitable racks at a height that is easily accessible. 32 Compliance code / Foundries WorkSafe Victoria …

Page 43

… Appendices Appendix C – Consultation By law, employers must consult with employees on a range of matters that directly affect (or are likely to directly affect) their health and safety, so … – the work performed at the workplace • doing any other thing prescribed by the Regulations. In practice, this means that when planning to implement measures identified in this compliance code, or when making decisions to implement alternative measures to those specified in this …

Page 44

… standards Employers are required to ensure that no employee is exposed to an airborne level of a hazardous substance that is above the national exposure standard as set out by the … • the risk to health is largely managed through administrative controls (ie safe work practices or systems of work such as job rotation) • there is evidence that the risk controls … or ingestion is a significant route of exposure such as with exposure to lead. 42 Compliance code / Foundries WorkSafe Victoria …

Page 45

… biological monitoring. This is because biological monitoring takes into account all routes of exposure (ingestion, inhalation and skin absorption), while atmospheric monitoring only … existing controls, providing portable or temporary ventilation, adopting modified work practices, providing personal protective equipment (PPE) or ceasing work while normal control … to substances or to detect excessive absorption of substances. WorkSafe Victoria Compliance code / Foundries 43 …

Page 50

… Appendices Requirement Yes No N/A Is there proper fitting and testing of clothing and equipment? Is there regular cleaning/disinfecting of clothing and equipment? Is … including elimination, substitution, engineering controls and changing systems of work or work practices • changes in technology and state of knowledge about protective clothing and equipment • the workplace’s protective clothing and equipment program. 48 Compliance code / Foundries WorkSafe Victoria …

Facilities in construction 1st edition, 2018. cover

Name

Facilities in construction

Publisher

WorkSafe Victoria

Version: 1st edition, 2018. (Current)

Provides practical guidance for those who have duties or obligations in relation to the provision of facilities at construction site workplaces under the Occupational Health and Safety Act 2004 (OHS Act) and Occupational Health and Safety Regulations 2017 (OHS Regulations).

2 results

… Preface This compliance code (Code) provides practical guidance for those who have duties or obligations in relation to the provision of facilities at construction site workplaces under the Occupational Health and Safety Act 2004 … Regulations should use the Code together with this legislation. This Code replaces the Code of Practice (No. 13) – Building and Construction Workplaces (1990) which is no longer in force and …

Page 5

Page 18

… Are change rooms provided for employees and contractors who are required to change in and out of clothing? Do change rooms provide appropriate privacy for male and female employees and … put in place for the type and number of facilities to be reviewed periodically (eg when work practices or workplaces are modified, more employees and contractors are engaged, new work … of employees and contractors occurs)? WorkSafe Victoria Facilities in construction compliance code 14 …

Removing asbestos in workplaces 2nd edition, 2019. cover

Name

Removing asbestos in workplaces

Publisher

WorkSafe Victoria

Version: 2nd edition, 2019. (Current)

Provides practical guidance for those who have duties or obligations in relation to asbestos under the Occupational Health and Safety Act 2004 (OHS Act) or the Occupational Health and Safety Regulations 2017 (OHS Regulations).

6 results

… and experience to carry out the relevant function. OHS Regulations r207(1)(c) For the purposes of determining if airborne asbestos fibres are likely to equal or exceed one half the asbestos … to identify the likelihood of exposure to airborne asbestos fibres in relation to specific work practices • the ability to interpret paraoccupational air monitoring reports for friable removal … and experience are appropriate. WorkSafe Victoria Removing asbestos in workplaces compliance code 107 …

Page 109

Page 131

… (specify): Security fencing to prevent unauthorised access to removal area 4. Controls/work practices to control airborne asbestos ﬁbres No power tools (hammer/pinch bar/scraper/knife/ … Dust Class H vacuum cleaner Spray with water Wet-wipe Dust Class H vacuum cleaner Wash Dispose of as asbestos waste Dispose of as asbestos waste Launder at laundry equipped to launder … lined waste skips Other (specify): WorkSafe Victoria Removing asbestos in workplaces compliance code 129 …

Page 135

… Appendix H – Exposure standard and atmospheric monitoring Results of atmospheric monitoring can only be directly compared to the exposure standard if monitoring … required? • the risk to health is largely managed through administrative controls (ie safe work practices or systems of work) and employees do not always follow these practices – perhaps due … that may adversely affect employee exposure. Removing asbestos in workplaces compliance code 133 …

Page 136

… publications issued by WorkSafe and SWA. Further information and advice can be obtained from professionals such as occupational hygienists. Who can conduct the atmospheric monitoring? … level of effectiveness, providing portable or temporary ventilation, adopting modified work practices or providing PPE. Results of atmospheric monitoring to be available An employer must … whether a laboratory is approved by NATA. 134 Removing asbestos in workplaces compliance code WorkSafe Victoria …

Page 157

… used to enclose the areas where the asbestos removal work is being performed. 8. • the quantity of asbestos proposed to be removed • in relation to ACM: – whether the ACM is friable or … details regarding: Administrative controls to be implemented, including: • security • work practices. 9. Methods of cleaning following asbestos removal work. 10. Names of persons engaged … protective clothing and PPE. WorkSafe Victoria Removing asbestos in workplaces compliance code 155 …

Page 158

… Appendix R – Documents associated with this compliance code The references listed are not incorporated into this Code; they are included to provide an indication of sources of additional information. This means the references do not form part of this Code. … Note that some references may have legal status in their own right. Safe Work Australia Code of Practice, 2016, How to safely remove asbestos Safe Work Australia Code of Practice, 2016, How to …

How to manage work health and safety risks cover image 2018

Name

How to manage work health and safety risks

Publisher

Safe Work Australia

Version: 2018. (Current)

This Code of Practice on how to manage work health and safety risks is an approved code of practice under section 274 of the Work Health and Safety Act (the WHS Act).

37 results

… How to manage work health and safety risks Code of Practice MAY 2018 …

Page 1

… Foreword This Code of Practice on how to manage work health and safety risks is an approved code of practice under section 274 of the Work Health and Safety Act (the WHS Act). An approved …

Page 5

… a business or undertaking (PCBUs) designers, manufacturers, importers, suppliers and installers of plant, substances or structures, and officers. Workers and other persons at the workplace … hazards and risks associated with the operations of How to manage work health and safety risks Code of Practice Page 5 of 39 …

Page 6

… processes to eliminate or minimise risks to health and safety. Further information on who is an officer and their duties is available in the Interpretive Guideline: The health and safety duty … to allow that person to comply with the WHS Act. How to manage work health and safety risks Code of Practice Page 6 of 39 …

Page 7

… operate and manage the business or undertaking. You also need the involvement and cooperation of your workers, supply chain partners, and other businesses you work with. Management … skill to do tasks safely, and apply health and safety values and behaviours to your own work practices. A step-by-step process A safe and healthy workplace does not happen by chance or … This process is known as risk management and involves the four steps set out in this Code (see Figure 1 below): − − − − Identify hazards—find out what could cause harm. Assess …

Page 8

… Further information is available in the Interpretive Guideline: The meaning of ‘reasonably practicable’. The process of managing risk described in this Code will help you decide what is reasonably practicable in particular situations so that you … reducing work-related injuries and disease. How to manage work health and safety risks Code of Practice Page 8 of 39 …