Search all content

591 - 600 of 2386 results
AS 4785.2-2002 Timber - Softwood - Sawn and milled products, Part 2: Grade description 2002 cover

Standards Australia

Version:  First Edition 2002.  (Current)
Sets out the grade descriptions for use with the softwood products specified in Part 1 of this series. The grades are not intended to indicate a ranking of quality. They are primarily used for appearance products. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810.
AS 2758.1:2014 Aggregates and rock for engineering purposes, Part 1: Concrete aggregates 2014 cover

Standards Australia

Version:  Third Edition 2014.  (Current)
Provides a basis for specifying requirements for aggregates intended for use in the production of concrete, including precast products.
AS/NZS 2210.1:2010 Safety, protective and occupational footwear, Part 1: Guide to selection, care and use 2010 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2010.  (Pending Revision)
Sets out recommended practices for selection, care and use of safety, protective and occupational footwear.
AS/NZS 2499:2000 Acoustics - Measurements of sound insulation in buildings and of buildings elements - Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it 2000 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2000.  (Current)
Provides a laboratory method of measurement the airborne sound insulation of a suspended ceiling with a plenum of defined height mounted above an acoustical barrier which separates two rooms of a specified test facility. This Standard has been adopted with national modifications and reproduced from ISO 140-9:1985.
AS 6669:2016 Plywood - Formwork 2016 cover

Standards Australia

Version:  Second Edition 2016.  (Current)
Specifies requirements for the manufacture, grading, finishing and branding of plywood used specifically in formwork, with a maximum length of 3100mm and width of 1500mm, intended to meet off-form surface finish requirements of Classes2, 3, 4 and 5 as specified in AS3610.1.
AS 2503.5-2003 Refractories and refractory materials - Chemical analysis, Part 5: Chrome-bearing materials 2003 cover

Standards Australia

Version:  Second Edition 2003.  (Current)
Sets out methods for the sampling, sample preparation, and analysis of chrome-bearing materials.
AS 1832-2007 Malleable cast iron 2007 cover

Standards Australia

Version:  Fourth Edition 2007.  (Current)
Adopts ISO 5922:2005 to specify the classification of malleable cast irons based on mechanical properties.
AS 2397:2015 Safe use of lasers in the building and construction industry 2015 cover

Standards Australia

Version:  Third Edition 2015.  (Current)
Sets out safety requirements for the use of lasers for alignment, levelling, control and survey tasks in the building and construction industry.
AS ISO 14004:2018 Environmental management systems - General guidelines on implementation 2018 cover

Standards Australia

Version:  Third Edition 2018.  (Current)
This Standard is to provide guidance for an organization on the establishment, implementation, maintenance and improvement of a robust, credible and reliable environmental management system.
AS 2436-2010 Guide to noise and vibration control on construction, demolition and maintenance sites 2010 cover

Standards Australia

Version:  Second Edition 2010.  (Current)
This Standard provides guidance on noise and vibration control in respect to construction, demolition and maintenance sites. This Standard also provides guidance for the preparation of noise and vibration management plans, work method statements and environmental impact studies.