Search all content

781 - 790 of 1751 results
AS 1141.20.1-2000 Methods for sampling and testing aggregates, Method 20.1: Average least dimension - Direct measurement (nominal size 10 mm and greater) 2000 cover

Standards Australia

Version:  First Edition 2000.  (Current)
This Standard sets out the counting method for determining the average least dimension of aggregate particles by the use of vernier callipers or dial gauge or a slotted gauge. The method is applicable to aggregate of nominal size 10 mm and greater for sprayed bituminous surfacing.
AS 1141.31:2015 Methods for sampling and testing aggregates, Method 31: Light particles 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Sets out the method for determining the amount of light particles (i.e. particles whose density is less than 2.0 g/mL) in fine and coarse aggregates.
AS 1141.6.1-2000 Methods for sampling and testing aggregates, Method 6.1: Particle density and water absorption of coarse aggregate - Weighing-in-water method 2000 cover

Standards Australia

Version:  Second Edition 2000.  (Current)
This Standard sets out the method for determining the particle density, apparent particle density and water absorption of aggregates substantially retained on a 4.75 mm sieve, by weighing in water.
AS 1141.29:2014 Methods for sampling and testing aggregates, Method 29: Accelerated soundness index by reflux 2014 cover

Standards Australia

Version:  Second Edition 2014.  (Current)
This Standard sets out the method used to estimate the durability of a basaltic source rock or product by providing a measure of the amount of physical degradation induced in the sample by immersion in boiling ethylene glycol.
AS 4046.2-2002 Methods of testing roof tiles, Method 2: Determination of batten lugs and squareness 2002 cover

Standards Australia

Version:  Second Edition 2002.  (Current)
This Standard sets out the method for the selection of roof tiles for testing and sets out the method for determining that the tiles are self-supporting when hung on the lugs provided and the alignment of the tile is true.
AS/NZS 4455.3:2008 Masonry units, pavers, flags and segmental retaining wall units, Part 3: Segmental retaining wall units 2008 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2008.  (Current)
Sets out requirements for segmental retaining wall units, to facilitate design and purchasing.
AS 1012.23:2015 Methods of testing concrete, Method 23: Water content of freshly mixed concrete - Microwave oven method 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Provides a method of estimation of the free water content of fresh concrete using a relatively high-powered microwave oven within a short period of time.
AS 4349.1-2007 Inspection of buildings, Part 1: Pre-purchase inspections - Residential buildings 2007 cover

Standards Australia

Version:  Second Edition 2007.  (Pending Revision)
Set out requirements for pre-purchase inspections of residential buildings, including the minimum criteria necessary in order to facilitate inspections and reports that are satisfactory to both the client and inspector.
AS 1670.5:2016 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 5: Special hazards systems 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
This Standard sets out requirements for the design, installation and commissioning of special hazards detection, actuation and control systems comprising components complying with the requirements of the relevant product Standards itemized in AS1670.1.
AS/NZS 61439.4:2016 Low-voltage switchgear and controlgear assemblies, Part 4: Particular requirements for assemblies for construction sites (ACS) (IEC 61439-4, Ed. 1.0 (2012), MOD) 2020 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2016.  (Current)
Adopts IEC61439-4, Ed. 1.0 (2012) to provide specific requirements for the design of low-voltage switchgear and controlgear assemblies for use on construction sites.