Search all content

This Standard sets out the method for determining the material thickness and the core volume percentage of masonry units.

Provides methods of measurement of ballast energy consumption and performance when used with associated fluorescent lamps as part of luminaires and applies to those covered within the scope of IEC 60081 and IEC 60901. The common methods practiced in major parts of the world, Europe in particular are prescribed in This Standard and relevant appendices. The tests specified are derived from EN 50294 with significant restructuring and modifications. The scope of this Standard excludes self-ballasted lamps and does not cover safety requirements.

Sets out minimum requirements for the design of the structural steelwork in bridges in limit states format, including wrought and cast iron structures.

Specifies classification, labelling and minimum energy performance requirements for ballasts for linear fluorescent lamps for use on 230 V to 250 volt a.c. at 50 Hz supply. This Standard is to be read in conjunction with AS/NZS 4783.1.

AS NZS 5131 2016 sets out minimum requirements for the construction of structural steelwork involving fabrication, preparation of steel surfaces for corrosion protection, corrosion protection comprising painting and galvanizing, erection and modification of steelwork. Steel fabrication standard.

Originated as AS 4459.2—1999. Revised and redesignated as AS ISO 10545.2:2020.

Provides the minimum requirements for pavers and flags for use in pavements. Proposed as an Australian/New Zealand Standard.

The objective of this Standard is to provide a method for calculating energy consumption and determining the comfort performance of space heating and cooling systems and ventilator systems.

Specifies method for determining methylene blue adsorption value (MBV) for natural sands, manufactured sands, crusher dusts and mineral fillers used in asphaltApplies to aggregate of less than 5 mm nominal size and may be used for both natural and manufactured sands. Tests the passing 75 μm fraction of a laboratory dried, unwashed fine aggregate sample. Test may be applied to fillers from baghouse fines or from ground limestone products or to mixtures of these two materials

AS 4691.2:2023 sets out requirements and guidelines to facilitate the safe and accurate use of a laser device for measuring the speed of a target vehicle for purposes including, but not limited to, personal, industry, scientific and law enforcement activities.