Search all content

551 - 560 of 1771 results
AS 1289.6.1.1:2014 Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen 2014 cover

Standards Australia

Version:  Second Edition 2014.  (Current)
This Standard sets out a method for determining the California Bearing Ratio (CBR) of a soil when compacted and tested in the laboratory. The CBR value is measured on the fraction of material passing the 19mm sieve. This Standard is not applicable to materials with more than 20% retained on the 19mm sieve.
AS 2428.3-2004 Methods of testing smoke/heat release vents, Method 3: Determination of operating characteristics 2004 cover

Standards Australia

Version:  Second Edition 2004.  (Current)
This Standard sets out the method for determining the operating characteristics of a smoke/heat release vent under a specified heat.
AS 2397:2015 Safe use of lasers in the building and construction industry 2015 cover

Standards Australia

Version:  Third Edition 2015.  (Current)
Sets out safety requirements for the use of lasers for alignment, levelling, control and survey tasks in the building and construction industry.
AS 4663-2013 Slip resistance measurement of existing pedestrian surfaces 2013 cover

Standards Australia

Version:  First Edition 2013.  (Pending Revision)
Sets out methods of measuring the frictional characteristics of existing pedestrian surfaces in wet and dry conditions.
AS 5203:2016 Protection of openable windows/fall prevention - Test sequence and compliance method 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
This Standard sets out methods for determining the performance of devices intended to prevent the risk of injury and death associated with accidental falls through open windows by children five years old and younger.
AS 4786.2-2005 Timber flooring, Part 2: Sanding and finishing 2005 cover

Standards Australia

Version:  First Edition 2005.  (Current)
Proposes methods for the sanding and finishing of timber floors including strip flooring and parquet. Information is included for specifiers, on the problems of assessing equilibrium moisture content and on the types of coating systems available..
AS 1141.30.2:2022 Methods for sampling and testing aggregates, Method 30.2: Preparation of aggregate reference specimens for visual comparison 2022 cover

Standards Australia

Version:  Second Edition 2022.  (Current)
AS 1141.30.2:2022 sets out the method for preparing reference specimens that represent each of the visually distinguishable rock types present in a quarried source for use in AS 1141.30.1.
AS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall units, Part 1: Masonry units 2008 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2008.  (Current)
Sets out requirements for masonry units used for walls built in accordance with AS 3700 and NZS 4230.
AS 4256.3-2006 Plastic roof and wall cladding materials, Part 3: Glass fibre reinforced polyester (GRP) 2006 cover

Standards Australia

Version:  First Edition 2006.  (Current)
Specifies requirements for general purpose translucent and opaque glass fibre reinforced polyester sheets of flat, corrugated and other geometrical configurations intended for roof and wall cladding materials.
AS/NZS 61439.2:2016 Low-voltage switchgear and controlgear assemblies, Part 2: Power switchgear and controlgear assemblies (IEC 61439-2, Ed. 2.0 (2011), MOD) 2020 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2016.  (Pending Revision)
Adopts IEC61439-2, Ed. 2.0 (2011) to define specific requirements of power switchgear and controlgear assemblies (PSC-ASSEMBLIES).