Search all content

Adopts IEC61439-4, Ed. 1.0 (2012) to provide specific requirements for the design of low-voltage switchgear and controlgear assemblies for use on construction sites.

Specifies requirements for the layout, design and security of bicycle parking facilities in any location, either on-street or off-street. Appendices give examples of bicycle parking hardware and examples of parking arrangements on footpaths.

This Standard sets out requirements for the design, installation and commissioning of special hazards detection, actuation and control systems comprising components complying with the requirements of the relevant product Standards itemized in AS1670.1.

Specifies an infrared absorption method after combustion of the test portion at high temperature in a current of pure oxygen using a high frequency induction furnace. The method can be used for the determination of sulfur content between 0.002 percent and 0.10 percent in steel. This Standard is identical with and reproduced from ISO 4935:1989.

Set out requirements for pre-purchase inspections of residential buildings, including the minimum criteria necessary in order to facilitate inspections and reports that are satisfactory to both the client and inspector.

Specifies requirements for couplers and accessories for scaffolding complying with AS/NZS 1576.3 and AS/NZS 1576.6.

Sets out minimum design and performance requirements for bearings and deck joints for the articulation and accommodation of movements of bridge structures. It does not apply to concrete hinges.

Specifies requirements for transparent, translucent and opaque polycarbonate sheeting intended for use as roof or wall cladding.

Sets out requirements and recommendations for the storage and handling non-flammable cryogenic liquids at temperatures below minus 90 degrees Celsius and non-flammable refrigerated liquids at or below minus 15 degrees Celsius which are classified as Class 2.2 in the ADG Code. Special requirements for the storage and handling of liquefied oxygen, nitrous oxide, nitrogen, argon, helium and carbon dioxide are provided. The properties and hazards of these liquids, precautions for their handling and an outline of first aid procedures are discussed.

This Standard sets out requirements for the design, manufacture and installation of cabinetry in the built environment covering kitchens and built-in furniture.