Search all content

Provides means of measuring the frictional characteristics of existing pedestrian surfaces in wet and dry conditions.

Based on the USA standard EIA/TIA 569, This Standard specifies provisions to be made in the design and construction of commercial buildings in order to accommodate and provide ready access to telecommunications infrastructure and facilities appropriate to typical client needs, with some allowance for future expansion.

AS 2710.10-1984 sets out recommended procedures for methods of analysis andinterpretation that may be used on fresh or hardened mortar to determine the nature andproportion of its original ingredients.

Sets out requirements for the design, application and testing of assistive listening systems. It also provides information to enable access to communication for people who have a hearing impairment or who are deaf.

Specifies requirements for inverters with ratings of up to 10 kVA for single-phase systems, or 30 kVA for three-phase systems, and intended for connection to the low-voltage electricity distribution network (grid).

Sets out minimum requirements for a geotechnical site investigation, as a component in the engineering design, construction, commissioning and operation of civil engineering and building works. Comprehensive appendices are provided dealing with preferred systems of geotechnical investigations and commonly considered laboratory tests. A typical project brief for a geotechnical site investigation is given and the commentary sets out guidelines on construction assessment, maintenance and evaluation of failures.

Specifies minimum requirements for the layout of off-street facilities for the loading and unloading of commercial vehicles, including design requirements for access driveways across the property boundary and for internal circulation roadways. It provides for a variety of standard design vehicle sizes and configurations.

Sets grade descriptions for use with the hardwood products specified in AS 2796.1. The grades are not intended to indicate a ranking of quality. They are primarily used with appearance products.

This Standard is technically equivalent to and has been reproduced from ISO 10545-6:1995.

Sets out procedures for the installation of premoulded fibre-reinforced plastic swimming pools complying with the requirements of AS/NZS 1838:1994, for above and below ground locations.