Search all content

811 - 820 of 1775 results
AS 1012.23:2015 Methods of testing concrete, Method 23: Water content of freshly mixed concrete - Microwave oven method 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Provides a method of estimation of the free water content of fresh concrete using a relatively high-powered microwave oven within a short period of time.
AS 4349.1-2007 Inspection of buildings, Part 1: Pre-purchase inspections - Residential buildings 2007 cover

Standards Australia

Version:  Second Edition 2007.  (Pending Revision)
Set out requirements for pre-purchase inspections of residential buildings, including the minimum criteria necessary in order to facilitate inspections and reports that are satisfactory to both the client and inspector.
AS 1670.5:2016 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 5: Special hazards systems 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
This Standard sets out requirements for the design, installation and commissioning of special hazards detection, actuation and control systems comprising components complying with the requirements of the relevant product Standards itemized in AS1670.1.
AS/NZS 61439.4:2016 Low-voltage switchgear and controlgear assemblies, Part 4: Particular requirements for assemblies for construction sites (ACS) (IEC 61439-4, Ed. 1.0 (2012), MOD) 2020 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2016.  (Current)
Adopts IEC61439-4, Ed. 1.0 (2012) to provide specific requirements for the design of low-voltage switchgear and controlgear assemblies for use on construction sites.
AS 4046.8:2015 Methods of testing roof tiles, Method 8: Adhesive mechanical fasteners - Flexible pointing 2015 cover

Standards Australia

Version:  Third Edition 2015.  (Current)
Sets out the method for testing flexible pointing to determine its suitability for use as an adhesive flexible pointing after conditioning by prolonged water saturation.
AS/NZS 4347.2:1995 Damp-proof courses and flashings - Methods of test, Method 2: Determination of continuity of coating on metal centres 1995 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1995.  (Current)
This Standard sets out the method of determining the continuity of the coating of damp-proof courses and flashings with metal centres of aluminium, copper, lead or zinc.
AS/NZS 2098.11:2005 Methods of test for veneer and plywood, Method 11: Determination of formaldehyde emissions for plywood 2005 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2005.  (Current)
This Standard sets out a method for the determination of formaldehyde emissions from plywood.
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel, Part 16: Determination of sulfur content - Infrared absorption method after combustion in an induction furnace 1994 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1994.  (Current)
Specifies an infrared absorption method after combustion of the test portion at high temperature in a current of pure oxygen using a high frequency induction furnace. The method can be used for the determination of sulfur content between 0.002 percent and 0.10 percent in steel. This Standard is identical with and reproduced from ISO 4935:1989.
AS/NZS 2098.7:2006 Methods of test for veneer and plywood, Method 7: Density of veneer and plywood 2004 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Current)
This Standard sets out two methods for determining the density of veneer and plywood; Method 1 - a direct measurement; Method 2 - a method intended for comparative purposes.
AS 2503.1-2006 Refractories and refractory materials - Chemical analysis, Part 1: Silica refractories 2006 cover

Standards Australia

Version:  Third Edition 2006.  (Current)
Sets out methods for the sampling, preparation of samples and analysis of silica refractories and refractory materials