Search all content

… Foreword This Code of Practice on how to manage the risks associated with abrasive blasting is an approved code of practice under section 274 of the Work Health and Safety (WHS) Act. An approved code of …

… 1. Introduction 1.1. What is abrasive blasting? ‘Abrasive blasting’ means propelling a stream of abrasive material at high speed against a surface using compressed air, liquid, steam, … practicable, minimise the risks so far as is reasonably practicable. Abrasive blasting Code of Practice Page 5 of 46 …

… The WHS Regulations include more specific requirements to manage the risks of hazardous chemicals, airborne contaminants and plant, as well as other hazards associated … and coordinate with other duty holders. Designers, manufacturers, importers and suppliers of plant, substances or structures WHS Act Part 2 Division 3 Further duties of persons … it in accordance with the information and instruction and training provided. Abrasive blasting Code of Practice Page 6 of 46 …

… Other persons at the workplace WHS Act section 29 Duties of other persons at the workplace Other persons at the workplace, like visitors, must take … WHS Regulations Part 3.1 Regulations 32–38 Managing risks to health and safety This Code provides guidance on how to manage the risks associated with abrasive blasting in the … with abrasive blasting. Further guidance on the risk management process is in the Code of Practice: How to manage work health and safety risks. Consulting workers WHS Act section 47 Duty …

… The broad definition of a ‘worker’ under the WHS Act means a PCBU must consult, so far as is reasonably practicable, … other to implement the control measures. Further guidance on consultation is available in the Code of Practice: Work health and safety consultation, cooperation and coordination. 1.4. Information, …

… instruction provided to a worker are suitable and adequate having regard to: − − − the nature of the work carried out by the worker the nature of the risks associated with the work at the … for a hazardous chemical, or is likely to be exposed to a hazardous chemical. Abrasive blasting Code of Practice Page 9 of 46 …

… be implemented to control risks. It will help to: − − − − identify which workers are at risk of exposure determine what sources and processes are causing that risk identify if and what kind … 8-hour time-weighted average peak limitation, and short term exposure limit. Abrasive blasting Code of Practice Page 10 of 46 …

… Exposure standards are based on the airborne concentrations of individual substances that, according to current knowledge, should not cause adverse health … on the risk management process and the hierarchy of control measures is available in the Code of Practice: How to manage work health and safety risks. Abrasive blasting Code of Practice Page 11 …

… PCBU you must ensure that air monitoring is carried out to determine the airborne concentration of a substance or mixture at the workplace to which an exposure standard applies if: − − you are … Further guidance on the risk management process and the hierarchy of control measures is in the Code of Practice: How to manage work health and safety risks. Abrasive blasting Code of Practice Page 12 …

Page 13

… and associated risks is not reasonably practicable, you must minimise the risk by one or more of the following: − − − Substitution—minimise the risk by substituting or replacing a hazard or hazardous work practice with something that gives rise to a lesser risk. For example, use a less hazardous … your chosen control measures do not introduce new hazards. Chapter 3 and Chapter 4 of this Code provide information on control measures for abrasive blasting activities. 2.4. Maintaining …

Name

Abrasive blasting

Publisher

Workplace Health and Safety Queensland

Version: 2021. (Current)

Intended to be read by a person conducting a business or undertaking (PCBU). It provides practical guidance to PCBUs on how to manage health and safety risks associated with abrasive blasting.

38 results

… Abrasive blasting Code of Practice 2021 …

… Foreword This code of practice on managing health and safety risks in abrasive blasting is an approved code of practice under section 274 of the Work Health and Safety Act 2011 (WHS Act). An approved …

… 1. Introduction 1.1. What is abrasive blasting? ‘Abrasive blasting’ means propelling a stream of abrasive material at high speed against a surface using compressed air, liquid, steam, … 2 Division 3 Further duties of persons conducting businesses or undertakings Abrasive blasting Code of Practice 2021 Page 5 of 40 …

… Designers, manufacturers, importers and suppliers of plant or substances or structures used in abrasive blasting must ensure, so far as is … these duties, the WHS Regulation requires: • • • manufacturers to consult with designers of the plant importers to consult with designers and manufacturers of plant the person who … WHS Regulation Part 3.1 sections 32–38 Managing risks to health and safety Abrasive blasting Code of Practice 2021 Page 6 of 40 …

… This code provides guidance on how to manage the risks associated with abrasive blasting in the … hazards—find out what could cause harm. Assess risks, if necessary—understand the nature of the harm that could be caused by the hazard, how serious the harm could be and the likelihood … on the risk management process is in the How to manage work health and safety risks Code of Practice. Consulting workers WHS Act section 47 Duty to consult workers A PCBU must consult, so …

… is available in the Work health and safety consultation, cooperation and coordination Code of Practice. 1.4. Information, training, instruction and supervision WHS Regulation section 19 …

… be implemented to control risks. It will help to: • • • • identify which workers are at risk of exposure determine what sources and processes are causing that risk identify if and what kind … adverse health effects nor cause undue discomfort to nearly all workers. Abrasive blasting Code of Practice 2021 Page 9 of 40 …

… and guidance for many substances. Although exposure standards may be listed in Section 8 of a chemical’s safety data sheet (SDS), you should always check the Workplace exposure … hierarchy of control measures is available in the How to manage work health and safety risks Code of Practice. Monitoring airborne contaminant levels WHS Regulation section 50 Monitoring airborne …

… PCBU you must ensure that air monitoring is carried out to determine the airborne concentration of a substance or mixture at the workplace to which an exposure standard applies if: • • you are … and the hierarchy of control measures is in the How to manage work health and safety risks Code of Practice. Eliminating and minimising the risk You must always aim to eliminate the risk. If …

… controls are physical control measures to minimise risk. For example, use automatic cut-off devices on abrasive blasting equipment. If risk remains, it must be minimised by … your chosen control measures do not introduce new hazards. Chapter 3 and Chapter 4 of this code provide information on control measures for abrasive blasting activities. 2.4. Maintaining … chemicals made the job safer? Are safety procedures being followed? Abrasive blasting Code of Practice 2021 Page 12 of 40 …

Labelling of workplace hazardous chemicals 2018

Name

Labelling of workplace hazardous chemicals

Publisher

Safe Work Australia

Version: 2018 (Current)

Provides practical guidance to PCBUs on how to label hazardous chemicals that are being manufactured or imported for use, handling or storage in Australia.

129 results

… Labelling of workplace hazardous chemicals Code of Practice OCTOBER 2018 …

Page 3

… 11 2.3. Disclosure of ingredients … 21 3.6. Duplication of labelling elements ....................................................................... 22 … .................................................................... 26 3.12. Labelling of products which pose hazard a but do not meet definition ............... 26 4. Labelling … 39 Labelling of workplace hazardous chemicals Code of Practice Page 3 of 130 …

… Appendix D—Application of label elements.................................................................... 51 D1. Structure of hazard statement text … .......................................................................... 51 D2. Structure of precautionary statement text................................................................ … 130 Labelling of workplace hazardous chemicals Code of Practice Page 4 of 130 …

… Foreword This Code of Practice on labelling hazardous chemicals is an approved code of practice under section 274 of the Work Health and Safety Act (the WHS Act). An approved …

… 1. Introduction This Code describes the type of information that is needed on labels for various hazardous chemicals so that users of these … provisions in Part 7.1 of the WHS Regulations. Chemicals labelled under the National Code of Practice for the Labelling of Workplace Substances WHS Regulation 341 Labelling hazardous …

… purposes, workplace labelling must be used. For example, a pharmacist repacks a 1 kg container of formulated tablets in smaller containers for dispensing to patients. The 1 kg container must … chemicals must meet the labelling requirements of the Agricultural and Veterinary Chemicals Code Act 1994. Where an agvet chemical is also a workplace hazardous chemical, additional … and toiletries being used at a workplace. Labelling of workplace hazardous chemicals Code of Practice Page 7 of 130 …

… transit do not require labelling under WHS laws. The requirements for packaging and labelling of chemicals in transit are set out in various Australian transport laws and codes, including: − − − − the Australian Code for the Transport of Dangerous Goods by Road and … Regulation 335 Labelling hazardous chemicals Labelling of workplace hazardous chemicals Code of Practice Page 8 of 130 …

… The manufacturer or importer of a workplace hazardous chemical must ensure that the chemical is correctly labelled as soon as … More information about correct labelling of hazardous chemicals is given throughout this Code. Suppliers of hazardous chemicals WHS Regulation 338 Supplier labelling hazardous chemicals … the WHS Regulations to correctly label. Labelling of workplace hazardous chemicals Code of Practice Page 9 of 130 …

… 2. Labelling hazardous chemicals – general information This chapter deals with the complete set of labelling elements that should be included on a container. A checklist for the preparation of … the label requirements for these and other special situations is provided in Chapter 3 of this Code. 2.1. What information must be included on a label? WHS Regulations Schedule 9 … of the SDS should be provided to them. Labelling of workplace hazardous chemicals Code of Practice Page 10 of 130 …

… safety data sheet, and may be identical to the trade name. The product identifier and details of ingredients should be grouped together and located at the most prominent position on the … A guide for selecting generic names for ingredients is included in Appendix C of this Code. Labelling of workplace hazardous chemicals Code of Practice Page 11 of 130 …

Labelling hazardous chemicals 2020 cover

Name

Labelling hazardous chemicals

Publisher

SafeWork SA

Version: 2020. (Current)

Provides practical guidance to PCBUs on how to label hazardous chemicals that are being manufactured or imported for use, handling or storage in Australia.

125 results

… This code is based on a national model code of practice developed by Safe Work Australia under the national harmonisation of work …

… Labelling hazardous chemicals Code of Practice June 2020 …

Page 2

… 39 Appendix D – Application of label elements .................................................................... 51 D1. Structure of hazard statement text … ........................................................................... 51 D2. Structure of precautionary statement text................................................................. … 126 Labelling of workplace hazardous chemicals Code of practice Page 4 of 126 …

… Foreword This Code of Practice on labelling hazardous chemicals is an approved code of practice under section 274 of the Work Health and Safety Act (the WHS Act). An approved …

… Food and beverages WHS Regulation 328 Application of Part 7.1 Food and beverage products that are packaged in a form intended for consumption do … chemicals must meet the labelling requirements of the Agricultural and Veterinary Chemicals Code Act 1994. Where an agvet chemical is also a workplace hazardous chemical, additional … and Veterinary Chemicals Code Act 1994 Labelling of workplace hazardous chemicals Code of practice Page 7 of 126 …

… − − listed in the Poisons Standard, Part 4 of Schedule 4 to the WHS Regulations, and packaged and supplied in a form intended for the … − a veterinary chemical product within the meaning of the Agricultural and Veterinary Chemicals Code Act 1994, and listed in Part 4, Schedule 8 of the Poisons Standard. The labelling of agvet … Code, and Civil Aviation Safety Regulations. Labelling of workplace hazardous chemicals Code of practice Page 8 of 126 …

… WHS Regulations apply specific duties to various persons in relation to the correct labelling of workplace hazardous chemicals. Where a chemical is regulated under more than one set of laws … and veterinary chemicals as defined in the Commonwealth’s Agricultural and Veterinary Chemicals Code Act 1994 must meet the requirements of both sets of laws. Note that under the WHS … with regulation 335 of the WHS Regulations. Labelling of workplace hazardous chemicals Code of practice Page 9 of 126 …

… uses, handles or stores hazardous chemicals WHS Regulations Part 7.1: Subdivision 3 Obligations of persons conducting a business or undertaking A PCBU that uses, handles or stores hazardous … under the WHS Regulations to correctly label. Labelling of workplace hazardous chemicals Code of practice Page 10 of 126 …

… 2. Labelling hazardous chemicals – general information This chapter deals with the complete set of labelling elements that should be included on a container. A checklist for the preparation of … the label requirements for these and other special situations is provided in Chapter 3 of this Code. 2.1. What information must be included on a label WHS Regulation 335: Schedule 9 … of the SDS should be provided to them. Labelling of workplace hazardous chemicals Code of practice Page 11 of 126 …

Preparation of safety data sheets for hazardous chemicals 2020 cover

Name

Preparation of safety data sheets for hazardous chemicals

Publisher

SafeWork SA

Version: 2020. (Current)

Provides practical guidance to PCBUs on how to prepare safety data sheets for hazardous chemicals that are being manufactured or imported for use, handling or storage in Australia.

115 results

… Preparation of safety data sheets for hazardous chemicals Code of Practice June 2020 …

Page 2

… This code is based on a national model code of practice developed by Safe Work Australia under the national harmonisation of work …

… 97 Division of substances into families and sub-families … ...................................................................... 109 Other relevant codes of practice .................................................................................. 109 … 116 Preparation of safety data sheets for hazardous chemicals Code of Practice Page 4 of 116 …

… Foreword This Code of Practice about the preparation of safety data sheets for hazardous chemicals is an approved code of practice under section 274 of the Work Health and Safety Act (the WHS Act). An approved …

… An SDS is an important tool for assessing and managing the risks associated with the use of hazardous chemicals in workplaces. See Appendix A for the definition of ‘hazardous chemical’ and other terms used in this Code. 1.2. What are the duties in relation to the preparation of safety data sheets? WHS … in the last five years. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 6 of 116 …

… an SDS if they are the manufacturer or importer and the changes are consistent with the duties of the importer or manufacturer. A PCBU who is not the manufacturer or importer may only change … to prepare an SDS for a non-hazardous chemical it should be prepared in accordance with this code so far as is reasonably practicable. The definition of hazardous chemical can be found in … to the WHS Regulations. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 7 of 116 …

… is evidence that the nanomaterials are not hazardous. Other information on hazard properties of a chemical not already captured within the SDS should be included, for example if the … and beverages within the meaning of the Food Standards Australia New Zealand Food Standards Code that are in a package and form intended for human consumption therapeutic goods within the … nerve, by a toxin. A list of ototoxic substances is included in Appendix A of the Code of Practice: Managing noise and preventing hearing loss at work. Preparation of safety data sheets …

… − tobacco or products made of tobacco. Note that the exemptions described above only apply in the circumstances described. … the exemption for therapeutic goods and veterinary chemical products only applies at the point of intentional intake or administration. SDS are required for these products at all other times, … at a pharmacy or veterinary clinic. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 9 of 116 …

… An SDS must be prepared and written to provide accurate information about: − − − − the hazards of a chemical how to handle the chemical safely, including its storage and disposal the … on next page’ or ‘End of SDS’. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 10 of 116 …

… Section 15—Regulatory information Section 16—Any other relevant information. Chapter 3 of this Code contains further guidance about the information that should be included in the SDS, … the manufacturer or importer. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 11 of 116 …

Preparation of safety data sheets for hazardous chemicals 2018 cover

Name

Preparation of safety data sheets for hazardous chemicals

Publisher

Safe Work Australia

Version: 2018. (Current)

Provides practical guidance to PCBUs on how to prepare safety data sheets for hazardous chemicals that are being manufactured or imported for use, handling or storage in Australia.

114 results

… Preparation of safety data sheets for hazardous chemicals Code of Practice …

… 97 Division of substances into families and sub-families … ....................................................................... 109 Other relevant codes of practice ................................................................................... … 116 Preparation of safety data sheets for hazardous chemicals Code of Practice Page 4 of 116 …

… the exemption for therapeutic goods and veterinary chemical products only applies at the point of intentional intake or administration. SDS are required for these products at all other times, … at a pharmacy or veterinary clinic. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 9 of 116 …

… An SDS must be prepared and written to provide accurate information about: − − − − the hazards of a chemical how to handle the chemical safely, including its storage and disposal the … and the available information. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 10 of 116 …

… All pages of an SDS should be numbered and include an indication of the end of the SDS, for example, ‘Page … Section 15—Regulatory information Section 16—Any other relevant information. Chapter 3 of this Code contains further guidance about the information that should be included in the SDS, where … the manufacturer or importer. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 11 of 116 …

… − − − − is written in English states the name, Australian address and business telephone number of the manufacturer or importer states that full identification or hazard information is not … the importer will be responsible for preparing an SDS that does comply. Section 3.1 of this Code details what information is required to be included in an SDS for it to be is compliant … workplaces at a later date. Preparation of safety data sheets for hazardous chemicals Code of Practice Page 12 of 116 …

Spray painting and powder coating 2020 cover

Name

Spray painting and powder coating

Publisher

SafeWork SA

Version: 2020. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with spray painting and powder coating.

56 results

… This code is based on a national model code of practice developed by Safe Work Australia under the national harmonisation of work …

… Spray painting and powder coating Code of Practice June 2020 …

Page 2

… Foreword This Code of Practice on how to manage the risks associated with spray painting and powder coating is an approved code of practice under section 274 of the Work Health and Safety Act (the WHS Act). An approved …

… for spraying: − − − using a conventional air compressor where air is driven across the mouth of a small outlet under pressure to draw liquid paint out of the container and produce an … eliminate or minimise risks and reduce the associated costs. Spray painting and powder coating Code of Practice Page 5 of 57 …

… Person conducting a business or undertaking WHS Act section 19 Primary duty of care A PCBU must eliminate risks arising from spray painting and powder coating, or if that … The health and safety duty of an officer under section 27. Spray painting and powder coating Code of Practice Page 6 of 57 …

… Workers WHS Act section 28 Duties of workers Workers have a duty to take reasonable care for their own health and safety and to … coating? WHS Regulations Part 3.1 Regulations 32–38 Managing risks to health and safety This Code provides guidance on how to manage the risks associated with spray painting and powder … as planned. Further general guidance on the risk management process is available in the Code of Practice: How to manage work health and safety risks. Spray painting and powder coating Code of …

… safety matters and assists in reducing work-related injuries and disease. The broad definition of a ‘worker’ under the WHS Act means a PCBU must consult, so far as is reasonably practicable, … work being carried out at that workplace. Further guidance on consultation is available in the Code of Practice: Work health and safety consultation, co-operation and co-ordination. Spray painting …

… the site. 1.4. Information, training, instruction and supervision WHS Section 19 Primary duty of care WHS Regulation 39 Provision of information, training and instruction The WHS Act … safety risks, the WHS Regulations also impose specific duties Spray painting and powder coating Code of Practice Page 9 of 57 …

… training and instruction required under Regulation 39. Spray painting and powder coating Code of Practice Page 10 of 57 …

… be implemented to control risks. It will help to: − − − − identify which workers are at risk of exposure determine what sources and processes are causing that risk identify if and what kind … hazards associated with spray painting or powder coating. Spray painting and powder coating Code of Practice Page 11 of 57 …

Spray painting and powder coating 2022 cover

Name

Spray painting and powder coating

Publisher

WorkSafe Western Australia

Version: 2020. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with spray painting and powder coating.

60 results

… Government of Western Australia Department of Mines, Industry Regulation and Safety CODE OF PRACTICE Spray painting and powder coating …

Page 3

… Government of Western Australia Department of Mines, Industry Regulation and Safety CODE OF PRACTICE Spray painting and powder coating …

… this publication is provided in good faith and believed to be reliable and accurate at the time of publication. However, the information is provided on the basis that the reader will be solely … death). Reference Work Health and Safety Commission, Spray painting and powder coating: Code of practice, Department of Mines, Industry Regulation and Safety 55pp. ISBN 978 1 920836 98 6 (web) …

… SPRAY PAINTING AND POWDER COATING – CODE OF PRACTICE IV …

… Controlling the risks of spray painting and powder coating....................................15 3.1 3.2 3.3 3.4 3.5 … 54 SPRAY PAINTING AND POWDER COATING – CODE OF PRACTICE 1 1 …

… paint for spraying: • using a conventional air compressor where air is driven across the mouth of a small outlet under pressure to draw liquid paint out of the container and produce an … risks of spray painting and powder coating. These include: SPRAY PAINTING AND POWDER COATING – CODE OF PRACTICE 2 • persons conducting a business or undertaking (PCBU) • designers, manufacturers, …

… Person conducting a business or undertaking WHS Act s. 19 Primary duty of care A PCBU must eliminate risks arising from spray painting and powder coating, or if that … work to consult with the designer of the structure. SPRAY PAINTING AND POWDER COATING – CODE OF PRACTICE To assist in meeting these duties, the WHS Regulations require: 3 …

… WHS service providers WHS Act s. 26A Duty of persons conducting businesses or undertakings that provide services relating to work health … duty of an officer. Workers WHS Act s. 28 Duties of workers SPRAY PAINTING AND POWDER COATING – CODE OF PRACTICE 4 Workers have a duty to take reasonable care for their own health and safety and to …

… Other persons in the workplace WHS Act s. 29 Duties of other persons at the workplace Other persons at the workplace, like visitors, must take … 3.1 rr. 32–38 WHS Mines Regulations Part 3.1 rr. 32–38 Managing risks to health and safety This Code provides guidance on how to manage the risks associated with spray painting and powder … systematic process: Further guidance on the risk management process is available in the Code of practice: How to manage work health and safety risks. Consulting workers WHS Act s. 47 Duty to …

Spray painting and powder coating 2018 cover

Name

Spray painting and powder coating

Publisher

Safe Work Australia

Version: 2018. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with spray painting and powder coating.

54 results

… Workers WHS Act section 28 Duties of workers Workers have a duty to take reasonable care for their own health and safety and to … coating? WHS Regulations Part 3.1 Regulations 32–38 Managing Risks to Health and Safety This Code provides guidance on how to manage the risks associated with spray painting and powder … working as planned. Further guidance on the risk management process is available in the Code of Practice: How to manage work health and safety risks. Spray painting and powder coating Code of …

… Spray painting and powder coating Code of Practice OCTOBER 2018 …

… 1.4. Information, training, instruction and supervision WHS Act section 19 Primary duty of care WHS Regulation 39 Provision of information, training and instruction The WHS Act … training and instruction required under WHS Regulation 39. Spray painting and powder coating Code of Practice Page 9 of 56 …

… be implemented to control risks. It will help to: − − − − identify which workers are at risk of exposure determine what sources and processes are causing that risk identify if and what kind … grinding equipment, airless spray equipment, compressed air Spray painting and powder coating Code of Practice Page 10 of 56 …

… lacerations, dislocations, concussion, permanent injuries or death spray painting at height or of trucks, ships, aeroplanes or bridges Electricity or static electricity − exposure to … the risk, and how urgently the action needs to be taken. Spray painting and powder coating Code of Practice Page 11 of 56 …