Search all content

… should ask the person commissioning the construction about safety issues such as the types of activities and tasks likely or intended to be carried out in the structure. A safety report … operation, demolition or dismantling and disposal; • materials to be used • what legislation, codes of practice and standards need to be considered and complied with. 2.1.1 Build-ability Designers, …

Page 11

… • • table forms systems with lighter weights of materials to be handled methods of formwork erection, alteration and dismantling improved … lifting device to be used). Further guidance on safe design is in the Safe design of structures Code of Practice. Changing floor levels Formwork decks are rarely flat across the entire floor, …

… be implemented to ensure that only materials and components that comply with the specifications of the formwork design drawings and documentation are being used. Materials and components that … is responsible for providing project documentation (as detailed in section 2.2.3 of this code) to assist with the design of the formwork. While this code requires that overseeing the … engineer. ‘Competent person’ is defined in the dictionary at Appendix 1. Formwork Code of Practice 2016 (PN11965) Page 13 of 54 …

… Single-sided more than 2.4m Engineer Self-climbing or crane assisted formwork systems Engineer Soffit formwork Less than 3m high and less than 250mm thick Competent person More than 3m high or … wind speeds for different zones in Australia. There are three regions for Queensland: Formwork Code of Practice 2016 (PN11965) Page 14 of 54 …

… • • • Region A (normal) – most of Queensland excluding coastal areas (includes Toowoomba and Mt Isa). Region B (intermediate) Queensland coastal areas south of Bundaberg and a narrow band behind region C (includes Brisbane and all of Gold Coast and … location of any mandatory joints and any special procedures for locating other joints Formwork Code of Practice 2016 (PN11965) Page 15 of 54 …

… • • • • • • • • • • sequence of placement of concrete requirements for propping of any composite construction details of the cambering of … equipment • vertical pour rates, and • methods of securing single or multiple props. Formwork Code of Practice 2016 (PN11965) Page 16 of 54 …

… 2.2.4 Design variations All variations from the design of a formwork system must be checked by an engineer and: • certified in writing by the engineer … specified in Table 2 is the height measured from the floor/ground immediately below. Formwork Code of Practice 2016 (PN11965) Page 17 of 54 …

… if not an engineer, must have appropriate training and knowledge to perform onsite inspections of the formwork system. This delegated person needs to be experienced in formwork construction … and move within it safely, both under normal working conditions and in an emergency Formwork Code of Practice 2016 (PN11965) Page 18 of 54 …

… to carry out their work without risk to their health and safety workers exposed to extremes of heat or cold are able to carry out work without risk to their health and safety work in … supports and a large volume of material and waste, requires ongoing monitoring of housekeeping practices. 3.2.1 Entry and exit Clear access is important for the safe movement of materials, … the forms against other structures. If this is not practical, wall forms must be Formwork Code of Practice 2016 (PN11965) Page 19 of 54 …

… placed against. An engineer must verify in writing that a surface to be used for the stacking of forms is capable of withstanding the impact of all imposed loads, including wind loading. The … Incorrect materials delivery and storage can create significant manual tasks. Safe work practices to minimise exposure to these risks include: • ensuring the formwork materials are … 2006 – Interior workplace lighting and the Managing the work environment and facilities Code of Practice provide guidance on the recommended illumination levels for various types of …

Name

Excavation work

Publisher

Safe Work Australia

Version: 2018. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with excavation work.

69 results

… safety matters and assists in reducing work-related injuries and disease. The broad definition of a ‘worker’ under the WHS Act means a PCBU must consult with employees and anyone else who … because they are involved in the same activities or share the same workplace. Excavation work Code of Practice Page 12 of 70 …

… near the excavation area. Duty holders should co-operate with each other to ensure that each of their activities do not create risks for other workers during the excavation work. Further guidance on consultation is available in the Code of Practice: Work health and safety consultation, cooperation and coordination. 1.4. Information, …

… site must also be provided to workers by a competent person. Workers operating certain types of plant at the workplace must possess a valid licence to operate that plant. Workers in a … on general construction induction training and other training is available in Chapter 6 of the Code of Practice: Construction work. Excavation work Code of Practice Page 14 of 70 …

… hazards WHS Regulation 35 Managing risks to health and safety WHS Regulation 36 Hierarchy of control measures WHS Regulation 37 Maintenance of control measures WHS Regulation 38 Review … specialists and review relevant information, records and incident reports. Excavation work Code of Practice Page 15 of 70 …

… Examples of excavation specific hazards include: − − − − − − − − − − − − − − underground essential … electricity, chemicals and fuel or refrigerant in pipes or lines the fall or dislodgement of earth or rock falls from one level to another falling objects inappropriate placement of … work is to be carried out hazardous atmosphere in an excavation, which could result from practices like using methyl ethyl ketone (MEK) solvent for PVC pipes in poorly ventilated … joints, bedding planes, dip and strike directions and angles, clay seams Excavation work Code of Practice Page 16 of 70 …

… − − − − − specialised plant or work methods required, for example ground support the method(s) of transport, haul routes and disposal what exposures might occur, for example noise, … on the risk management process and the hierarchy of control measures is available in the Code of Practice: How to manage work health and safety risks. Review available information Information …

… and used on their own tend to be the least effective in minimising risks. Chapters 4–6 of this Code provide information about control measures for excavation work. Further guidance on … the risk management process and the hierarchy of control measures is available in the Code of Practice: How to manage work health and safety risks. Combining control measures A combination …

… steps, review your information and make further decisions about risk control. Excavation work Code of Practice Page 19 of 70 …

… should include discussions on the: − − − − − − − − − − − − − − nature and condition of the ground and working environment weather conditions nature of the work and other activities … to deal with emergencies. Further information on amenities and emergencies is available in the Code of Practice: Managing the work environment and facilities. 3.1. Principal contractor for a …

… appoint the excavation contractor as the principal contractor for the site preparation phase of the project and then replace them with a building expert after this phase is completed. If … calculate the cost of construction work and on principal contractor duties is available in the Code of Practice: Construction work. 3.2. Designers WHS Act section 22 Duties of persons conducting …

Name

Excavation work

Publisher

Workplace Health and Safety Queensland

Version: 2021. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with excavation work.

62 results

… 1.4 Information, training, instruction and supervision WHS Act section 19 Primary duty of care WHS Regulation section 39 Provision of information, training and instruction WHS … in excavation work to ensure the work is carried out in accordance with a SWMS. Excavation work Code of Practice 2021 Page 11 of 62 …

Page 11

… process WHS Regulation section 34 Duty to identify hazards WHS Regulation section 35 Management of risk WHS Regulation section 36 Hierarchy of control measures WHS Regulation section 37 … specialists and review relevant information, records and incident reports. Excavation work Code of Practice 2021 Page 12 of 62 …

… Examples of excavation specific hazards include: • underground essential services including gas, water, … work is to be carried out • hazardous atmosphere in an excavation, which could result from practices like using methyl ethyl ketone (MEK) solvent for PVC pipes in poorly ventilated … ultraviolet radiation or hazardous chemicals • the number of people involved Excavation work Code of Practice 2021 Page 13 of 62 …

… • • • the possibility of unauthorised access to the work area local weather conditions the length of time the … hierarchy of control measures is available in the How to manage work health and safety risks Code of Practice. Review available information Information and advice about hazards and risks relevant …

… Chapters 4–6 of this Code provide information about control measures for excavation work. Further guidance on … of control measures is available in the How to manage work health and safety risks Code of Practice. Combining control measures A combination of control measures may be used to minimise …

… consulted at this stage. Consultation should include discussions on the: • nature and condition of the ground and working environment • weather conditions • nature of the work and other … on amenities and emergencies is available in the Managing the work environment and facilities Code of Practice. 3.1 Principal contractor for a construction project WHS Regulation section 292 Meaning …

… appoint the excavation contractor as the principal contractor for the site preparation phase of the project and then replace them with a building expert after this phase is completed. If … work. For further guidance on the duties of designers refer to the Safe design of structures Code of Practice. 3.3 Safe work method statements WHS Regulation section 299 Safe work method statement …

… The primary purpose of a SWMS is to help PCBUs, supervisors and workers implement and monitor the control measures … to ensure high risk construction work is carried out safely. The SWMS must: • identify the type of high risk construction work being done • specify the health and safety hazards relating to … Information Sheet: Safe Work Method Statement for high risk construction work. Excavation work Code of Practice 2021 Page 18 of 62 …

… WHS Regulation section 458 Duty to ensure asbestos removalist is licensed There are two types of asbestos licences: Class A and Class B. The class of licence required will depend on the type … to identifying whether asbestos is present and informing others if it is. Excavation work Code of Practice 2021 Page 19 of 62 …

… The PCBU with management or control of the workplace must ensure, so far as is reasonably practicable, that all asbestos or ACM at … far as is reasonably practicable, be removed before the demolition is started. If only a part of a building or structure is to be demolished, only the asbestos likely to be disturbed during … or control of that workplace before commencing the demolition or refurbishment. Excavation work Code of Practice 2021 Page 20 of 62 …

Name

Demolition work

Publisher

Workplace Health and Safety Queensland

Version: 2021. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with demolition work.

52 results

… process WHS Regulation section 34 Duty to identify hazards WHS Regulation section 35 Management of risk WHS Regulation section36 Hierarchy of control measures WHS Regulation section 37 … structure collapse • falls from one level to another • falling objects Demolition work Code of Practice 2021 Page 12 of 53 …

… • • • • • the location of above-ground and underground essential services including the supply of gas, water, sewerage, … measures. In these situations, the second step in the process outlined in section 1.3 of this Code to formally assess the risk is not required. If, after identifying a hazard, you already … of control measures is available in the How to manage work health and safety risks Code of Practice Review available information Information and advice about hazards and risks relevant to …

… substances (safety data sheets), plant or processes (instruction manuals). Analyse your records of health monitoring, workplace incidents, near misses, worker complaints and the results of any … • Substitution—minimise the risk by substituting or replacing a hazard or hazardous work practice with something that gives rise to a lesser risk. For example, using a mechanical … and used on their own tend to be the least effective in minimising risks. Chapters 4-6 of this Code provide information on control measures for demolition work. Further guidance on the risk …

… of the control measures will provide the best solution to minimise the risk to the lowest level … must be maintained so they remain fit for purpose, suitable for the nature and duration of work and installed, set up and used correctly. The control measures put in place to protect … steps, review your information and make further decisions about risk control. Demolition work Code of Practice 2021 Page 15 of 53 …

… plant operators. Consultation should include discussions about the: • nature and condition of the ground and working environment • weather conditions • nature of the work and other … on amenities and emergencies is available in the Managing the work environment and facilities Code of Practice. A demolition plan should be prepared for all demolitions where there is more than one …

… • • • • • • the name and contact details of the person directly supervising the work the date of the notice the nature of the demolition whether explosives will be used in carrying out the … all the duties of a principal contractor until the demolition work is complete. Demolition work Code of Practice 2021 Page 17 of 53 …

… 3.3 Designers WHS Act section 22 Duties of persons conducting businesses or undertakings that design plant, substances or structures WHS … section 295 Designer must give safety report to person who commissions design Designers of structures must ensure, so far as is reasonably practicable, that the structures they design … an engineering investigation and deliver an ‘engineering investigation report’. Demolition work Code of Practice 2021 Page 18 of 53 …

… taken into account when considering demolition risks: • the stability and structural integrity of the structure at all stages of demolition including assembled portions, single components and … Further guidance on the safe design of structures can be found in the Safe design of structures Code of Practice. Technical standards Demolition specifications and procedures should be designed in …

… responsible for actually preparing it. There may be situations where there are different types of high risk construction work occurring at the same time at the same workplace, for example if … to carry out asbestos removal work, high risk work, or use of explosives. Demolition work Code of Practice 2021 Page 20 of 53 …

… WHS Regulation section 458 Duty to ensure asbestos removalist is licensed There are two types of asbestos removal licence: Class A and Class B. The class of licence required will depend on … asbestos, asbestos registers and disposing of asbestos or ACM can be found in Chapter 4 of this Code. Further guidance relating to the duties associated with the removal of asbestos, and … and refurbishment work, is available in the model How to safely remove asbestos Code of Practice and How to manage and control asbestos in the workplace Code of Practice. 3.7 Adjacent …

Using timber for temporary perimeter guardrails 2022 cover

Name

Guidance Note GN052: Using timber for temporary perimeter guardrails

Publisher

WorkSafe Tasmania

Version: 2022. (Current)

Explains how to use correctly use timber to create safe temporary guardrails.

Managing the risks of plant in the workplace 2020 cover

Name

Managing the risks of plant in the workplace

Publisher

SafeWork SA

Version: 2020. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with managing risks of plant in the workplace.

64 results

… testing, maintaining or repairing plant, as well as decommissioning, dismantling or disposing of plant. This should include information on the types of hazards and risks the plant may pose … plant should all be taken into account. Supervisors should take action to correct unsafe work practices associated with plant as soon as possible. Otherwise workers may think unsafe work … items are registered. Further information on registering plant is provided in Chapter 5 of this Code. Managing the risks of plant in the workplace Code of Practice Page 12 of 65 …

… hazards WHS Regulation 35 Managing risks to health and safety WHS Regulation 36 Hierarchy of control measures WHS Regulation 37 Maintenance of control measures WHS Regulation 38 Review … or collision with other plant and structures. Managing the risks of plant in the workplace Code of Practice Page 13 of 65 …

… Further information on identifying these types of hazards is in SWA’s Workplace traffic management guidance material. When plant is being used to lift or suspend persons or things, the person with management or control of plant at a workplace must ensure, so far as is reasonably practicable, that the plant used is … history and how frequently the plant is used Managing the risks of plant in the workplace Code of Practice Page 14 of 65 …

… − − − the suitability of the plant, for example is it actually being used for its intended purpose? Has it been modified from its intended use? the location of the plant, for example what is its impact on the design and layout of the workplace and are … identified, you should consider the following. Managing the risks of plant in the workplace Code of Practice Page 15 of 65 …

… What is the potential impact of the hazard? − − How severe could an injury or illness be? For example, lacerations, … during the installation, operation or maintenance of plant and in an emergency? What work practices and procedures exist for plant safety? For example, is isolation required to carry out … Further guidance on the risk management process and the hierarchy of control measures is in the Code of Practice: How to manage work health and safety risks. Managing the risks of plant in the …

… the risk You must always aim to eliminate the risk. For example, you may design items of a size, shape and weight so they can be delivered, handled or assembled at the location where … − − − Substitution—minimise the risk by substituting or replacing a hazard or hazardous work practice with something that gives rise to a lesser risk. For example, installing a conveyor … 166 Overhead and underground electric lines Managing the risks of plant in the workplace Code of Practice Page 17 of 65 …

… practicable, that no person, plant or thing at the workplace comes within an unsafe distance of an overhead or underground electric line. If it is not reasonably practicable to ensure the … can be obtained from your Electricity Regulator. Managing the risks of plant in the workplace Code of Practice Page 18 of 65 …

… 2.4. Maintaining and reviewing control measures WHS Regulation 37 Maintenance of control measures WHS Regulation 38 Review of control measures Control measures must be … and make further decisions about control measures. Managing the risks of plant in the workplace Code of Practice Page 19 of 65 …

… about: − − − − the purpose for which the plant was designed or manufactured the results of calculations, analysis, testing or examination carried out to determine that the plant, so … minimise risks during use, for example low noise. Managing the risks of plant in the workplace Code of Practice Page 20 of 65 …

… Duties of suppliers and purchasers of second-hand plant Second-hand plant WHS Act section 25 Duties of persons conducting … practicable, identifying faults in the plant. Managing the risks of plant in the workplace Code of Practice Page 21 of 65 …

Managing the risks of plant in the workplace 2021 cover

Name

Managing the risks of plant in the workplace

Publisher

Safe Work Australia

Version: 2023. (Current)

Provides practical guidance to PCBUs on how to manage health and safety risks associated with managing risks of plant in the workplace.

67 results

… hazards WHS Regulation 35 Managing risks to health and safety WHS Regulation 36 Hierarchy of control measures WHS Regulation 37 Maintenance of control measures WHS Regulation 38 Review … or collision with other plant and structures. Managing the risks of plant in the workplace Code of Practice Page 14 of 69 …

… Further information on identifying these types of hazards is in SWA’s Workplace traffic management guidance material and Fact Sheet: Prevention of vehicle roll-aways and safe immobilisation. When plant is being used to lift or suspend … history and how frequently the plant is used Managing the risks of plant in the workplace Code of Practice Page 15 of 69 …

…    the suitability of the plant, for example is it actually being used for its intended purpose? Has it been modified from its intended use? the location of the plant, for example what is its impact on the design and layout of the workplace and are … identified, you should consider the following. Managing the risks of plant in the workplace Code of Practice Page 16 of 69 …

… What is the potential impact of the hazard?   How severe could an injury or illness be? For example, lacerations, … during the installation, operation or maintenance of plant and in an emergency? What work practices and procedures exist for plant safety? For example, is isolation required to carry out … Further guidance on the risk management process and the hierarchy of control measures is in the Code of Practice: How to manage work health and safety risks. Managing the risks of plant in the …

… the risk You must always aim to eliminate the risk. For example, you may design items of a size, shape and weight so they can be delivered, handled or assembled at the location where …    Substitution—minimise the risk by substituting or replacing a hazard or hazardous work practice with something that gives rise to a lesser risk. For example, installing a conveyor … and underground electric lines WHS Regulation 166 Managing the risks of plant in the workplace Code of Practice Page 18 of 69 …

… about:     the purpose for which the plant was designed or manufactured the results of calculations, analysis, testing or examination carried out to determine that the plant, so … minimise risks during use, for example low noise. Managing the risks of plant in the workplace Code of Practice Page 21 of 69 …

Page 22

How to safely remove asbestos 2020 cover

Name

How to safely remove asbestos

Publisher

SafeWork SA

Version: 2020. (Current)

Provides practical guidance to PCBU’s on how to manage health and safety risks associated with removing asbestos or asbestos-containing materials (ACM) from workplaces.

96 results

… to Class A asbestos removal work. Licensed asbestos assessors can also carry out a number of other tasks including identifying asbestos, carrying out a risk assessment or reviewing an … must be competent to identify asbestos). More information on these tasks can be found in the Code of Practice: How to Manage and Control Asbestos in the Workplace. 1.3. Health monitoring duties WHS …

Page 11

… − the duration of the work being undertaken. If a worker is carrying out licensed asbestos removal work, the … once every two years) after the worker commences asbestos-related work where there is a risk of exposure to asbestos. Who can carry out health monitoring? The PCBU must ensure health … obtaining it from the medical practitioner, to: − the worker How to safely remove asbestos Code of practice Page 12 of 96 …

… results indicate that the worker may have contracted a disease, injury or illness as a result of the work that triggered the need for health monitoring, and any recommended remedial … – Guide for persons conducting a business or undertaking. How to safely remove asbestos Code of practice Page 13 of 96 …

… or allow a worker to remove asbestos, if the asbestos being removed is: − − 10 m2 or less of non-friable asbestos (approximately the size of a small bathroom), or ACD that is:   … which does not require a licence you must comply with the duties outlined in Chapter 4 of this Code and also with some of the duties in Chapter 3 of this Code. These duties are summarised … the WHS Regulations (refer to Sections 3.9, 4.5 and 4.6). How to safely remove asbestos Code of practice Page 14 of 96 …

… Although it is not mandatory for you to prepare an asbestos removal control plan for this type of asbestos removal work, it may be beneficial to do so to ensure the work is being carried out … records must also be available for inspection by the regulator. How to safely remove asbestos Code of practice Page 15 of 96 …

… Licensed asbestos removal work can differ greatly depending on the type, quantity and condition of the asbestos or ACM being removed. There are a number of duties in the WHS Regulations to … supervisor to be present or readily available WHS Regulation 459 How to safely remove asbestos Code of practice Page 16 of 96 …

… Asbestos removalist supervisor to be present or readily available WHS Regulation 493 Content of application—Class A asbestos removal licence WHS Regulation 494 Content of application—Class … must be completed before the Class A removal unit of competency. How to safely remove asbestos Code of practice Page 17 of 96 …

… training to the general training that is provided on the identification and safe handling of asbestos and the appropriate controls referred to in Section 6.3 of the Code of Practice: How to Manage and Control Asbestos in the Workplace. This is a requirement for each …

… 3.3. Informing parties of the licensed asbestos removal WHS Regulation 467 Licensed asbestos removalist must inform … work As a licensed asbestos removalist you must inform the person with management or control of the workplace about the work and the date it is to commence before any licensed asbestos … and health effects associated with exposure to asbestos, and How to safely remove asbestos Code of practice Page 19 of 96 …

… − the need for and details of health monitoring of a worker carrying out licensed asbestos removal work. Section 1.3 of this Code provides more specific details on health monitoring. 3.4. Obtaining the asbestos register … address the specific situation requirements for each job. How to safely remove asbestos Code of practice Page 20 of 96 …

Name

Safe design of structures

Publisher

WorkSafe Western Australia

Version: 2022. (Current)

Provides practical guidance to persons conducting a business or undertaking (PCBU) who design structures that will be used, or could reasonably be expected to be used, as a workplace; this includes architects, building designers and engineers.

40 results

… what is reasonably practicable, consideration will be given to the prevailing standards of design and the hazards and risks known at the time the designer designed the structure. In … design detailed or specified by the designer and not by others. 1.4 SAFE DESIGN OF STRUCTURES – CODE OF PRACTICE 6 What is involved in managing risks associated with the design of structures? Risk …

… measures that are reasonably practicable in the circumstances in accordance with the hierarchy of control measures, and ensure they remain effective over time. • Review control measures to … are working as planned. Further guidance on the risk management process is available in the Code of practice: How to manage work health and safety risks. Hierarchy of control measures The WHS …

… at identifying any risks that a competent builder or user would not be expected to be aware of • consider where residual risks remain, and ensure these are communicated to the builder … Further guidance on the risk management process and the hierarchy of control measures is in the Code of practice: How to manage work health and safety risks. SAFE DESIGN OF STRUCTURES – CODE OF …

… 2 Key elements of safe design 2.1 Consider the lifecycle In the same way that designers consider the future … work. 2.2 Knowledge and capability • knowledge of work health and safety legislation, codes of practice and other regulatory requirements • an understanding of the intended purpose of the …

… 2.3 Consultation, cooperation and coordination There are a number of duty holders who have a role in either consultation, cooperation or coordination. These … because their health and safety may be affected by the new design. SAFE DESIGN OF STRUCTURES – CODE OF PRACTICE 10 This duty to consult is based on the recognition that worker input and participation …

… By drawing on the experience, knowledge and ideas of workers, hazards are more likely to be identified and effective control measures implemented. … in various contractual relationships. Further guidance on consultation is available in the Code of practice: Work health and safety consultation, cooperation and coordination. SAFE DESIGN OF …

… should be recorded and transferred from the design phase to those involved in later stages of the lifecycle. Communicating this information to other duty holders will make them aware of … for designers to consider when providing information include: SAFE DESIGN OF STRUCTURES – CODE OF PRACTICE 12 • making notes on drawings, as these will be immediately available to construction …

… Methods of transferring information Safety report WHS General Regulations r. 295 WHS Mines Regulations … workplace to the principal contractor. Work health and safety file SAFE DESIGN OF STRUCTURES – CODE OF PRACTICE The development of a work health and safety file for a structure could assist the …

… preliminary hazard analysis and consultation Identify hazards that are affected by the design of the structure, and are within the control of the designer Determine how risks will be … safety experience with this type of hazard. Design risk controls SAFE DESIGN OF STRUCTURES – CODE OF PRACTICE 14 Ensure health and safety is included with other structure requirements in the design …