Search all content

… Steel construction Code of Practice 2004 …

Page 2

… This Queensland code of practice was preserved as a code of practice under section 284 of the Work Health and Safety Act 2011. This code was varied …

… 5 How is the code organised … work?.............................................................................. 6 2 Control of risk through planning … 10 3.3 Risk of a person falling from one level to another … 25 5.5 Alignment of bolts … boom cranes .................................................................. 29 6.10 Loading of cranes … 31 Steel construction - Code of Practice 2004 - PN11187 Page 3 of 54 …

… 33 A2.2 Type of main … procedure for main frame with braced bay located in the end bay .......... 38 A2.5 Erection of remaining building components ........................................................... 41 … Sample of engineer’s certification letter for the use of rigger’s posts 54 Steel construction - Code of Practice 2004 - PN11187 Page 4 of 54 …

… 1 Introduction This Steel construction Code of Practice 2004 is an approved code of practice under section 274 of the Work Health and Safety …

Page 6

… for their own health and safety and that they do not adversely affect the health and safety of other persons. Workers must comply with any reasonable instruction and cooperate with any … is available in the Work health and safety consultation, co-ordination and co-operation Code of Practice. 1.1 Risk and steel construction This code of practice provides advice aimed at …

Page 7

… fly bracing trusses other related steelwork, for example, free standing structures. 2 Control of risk through planning 2.1 Planning to control risk Planning is an effective control measure … the preparation of a safe work method statement for the high risk construction work. This code of practice may be used to help persons identify what control measures need to be written into the …

Page 8

… 2.5 Designers It is critical that the designer considers the safe erection of the steel structure and provides guidance to the steel erector. This is particularly … to ensure the work by each contractor can be carried out safely. Steel construction - Code of Practice 2004 - PN11187 Page 8 of 54 …

Page 9

… should provide enough time for the steel to be constructed in a safe manner. (c) The frequency of site meetings to discuss health and safety issues on site. The timing of site meetings should ensure safe working practices are developed, implemented and maintained by all contractors as the various phases of … plan. Where the accuracy is not specifically detailed, the tolerances to the relevant code should be used. Failure to ensure the integrity of each PCBU’s work could lead to unsafe …

Page 10

… 3 Work systems 3.1 Prioritise control measures The primary risks to the health and safety of persons involved in steel construction work are falls from heights, falling objects, collapse … working on steel construction as these do not actually prevent a fall from Steel construction - Code of Practice 2004 - PN11187 Page 10 of 54 …

AS 1720.1-2010 Timber structures, Part 1: Design methods 2010 cover

Name

AS 1720.1-2010 Timber structures, Part 1: Design methods

Publisher

Standards Australia

Version: Third Edition 2010. (Current)

Provides a code of practice for the design and acceptance of timber structures and elements, and includes design methods and design data appropriate for commonly encountered structural elements and materials and requirements to be met for specification of the design, installation and maintenance of timber structures.

2 results

… by a marginal bar and amendment number against the clause, note, table, figure or part thereof affected. The decision to prepare this Standard as an Australian Standard was by consensus agreement of the Joint Committee. The objective of this Standard is to provide a code of practice for the design and acceptance of timber structures and elements. It includes design …

Page 113

… 111 AS 1720.1—2010 APPENDIX D ACCEPTANCE TESTING OF TIMBER STRUCTURES AND ELEMENTS (Normative) D1 GENERAL D1.1 Limitations of acceptance testing … or design methods are used other than those for which there is a relevant specification or code of practice; or (c) there is doubt or disagreement as to whether the structure or some part of it …

Overhead Protective Structures 1995 cover

Name

Overhead Protective Structures

Publisher

WorkCover NSW

Version: 1995. (Current)

Provides practical guidance and set minimum safety standards for all overhead protective structures in New South Wales.

10 results

… OVERHEAD PROTECTIVE STRUCTURES CODE OF PRACTICE making a difference 1995 New South Wales Government …

… CODE OF PRACTICE Overhead Protective Structures 20 March 1995 …

… Foreword This industry code of practice has been produced by the WorkCover Authority of NSW to provide industry with practical … guidance on the design, supply, installation and use of overhead protective structures. This Code has been developed to support the ‘SaferSite Program’, a WorkCover initiative aimed at …

… What is an industry code of practice? An approved industry code of practice is a practical guide to achieving the standard of health and safety required by …

Page 6

… In summary an approved INDUSTRY CODE OF PRACTICE: ✔ gives practical guidance on how the required standard of health and safety can be achieved in an area of work. ✔ should be followed unless there is …

Page 8

… 1 Introduction 1.1 Citation This code may be cited as the Code of practice – Overhead Protective Structures. 1.2 Purpose To provide practical guidance and set …

Page 14

… 4.1 Proximity to any powerline, transmission line, main or transmission apparatus The distance of any part of an overhead protective structure from any powerline, transmission line, main or … should be protected by wire guards or proprietary manufactured diffusers. In addition, the Code of Practice: Electrical Practices for Construction Work should apply to all electrical work. 4.3 …

Page 21

… additional requirements regarding the overhead protective structure including the submission of drawings and calculations for approval before erection. 8.2 Employer responsibilities Under … be made at the planning stage to the WorkCover Authority. Various Australian Standards and codes of practice which offer practical guidance on health and safety are listed in Section 8.5. However, …

Page 22

… their employment are not exposed to risks to their health and safety arising from the conduct of their undertaking at a place or work. 8.5 Standards and codes a. Standards AS 1725-1975, Galvanised Rail-Less Chainwire Security Fences and Gates … AS1742, Part 3, Traffic Control Devices for Work on Roads Guide to Traffic Engineering Practice: Intersections at Grade 1988. (This is available from the Roads and Traffic Authority.) …

Page 23

… 9 Definitions In this code of practice: “Overhead Protective Structure” means an overhead structure required for the protection of persons on a construction site and the adjoining public areas. It may also cover structures …

Work-related violence: Preventing and responding to work-related violence 2018 cover

Name

Work-related violence: Preventing and responding to work-related violence

Publisher

SafeWork SA

Version: 2018. (Current)

This guide covers two types of work-related violence: external violence and service-related violence.

3 results

… Disclaimer | While care has been taken to ensure the accuracy and currency of the information in this publication, at the time of reading it may not be sufficiently … it. To best meet your work health and safety obligations refer to current Acts, Regulations and Codes of Practice. 2 Work-Related Violence | Preventing and responding to work-related violence …

Page 2

… shift workers.  witnessing signs that work-related violence is affecting the health and safety of workers  proposing changes that may affect the health and safety of workers. Your … physical and psychological health. For more information about consultation, refer to the Code of Practice – Work Health and Safety Consultation, Cooperation and Coordination – visit …

Page 13

… Further information Work-related violence can fall within the scope of various state and federal laws. Physical assault, robbery, sexual assault and threats to harm … Work Health and Safety Act 2012 (SA) Work Health and Safety Regulations 2012 (SA) Code of Practice – Work health and safety consultation, cooperation and coordination Code of Practice – …

Name

Hazardous Manual Tasks

Publisher

SafeWork NSW

Version: 2021. (Current)

A person conducting a business or undertaking (PCBU) must manage risks to health and safety relating to a MSD associated with a hazardous manual task.

4 results

… SAFEWORK NSW HAZARDOUS MANUAL TASKS Manual tasks cover a wide range of activities that involve using the body to move or hold an object, people or animals. Examples … An overview of the risk management process for manual tasks is provided in Appendix C of the Code of Practice – Hazardous Manual Tasks. CONSULTING YOUR WORKERS You must consult with your workers …

Page 2

… pains that can signal potential hazards. • Observe manual tasks – identify if they involve any of the characteristics of a hazardous manual task. • Look for trends – you may be able to … will assist in determining which postures, movements and forces of the task pose a risk. The Code of Practice – Hazardous Manual Tasks provides guidance that will assist in answering these …

… SAFEWORK NSW HAZARDOUS MANUAL TASKS Question 4: Is there a risk? The task involves a risk of MSD if you have answered ‘yes’ to any of the following: • Question 1 • Question 2 • Question … than one risk factor. The more risk factors that are present, the higher the risk of MSD. The Code of Practice – Hazardous Manual Tasks provides further guidance about assessing risks. The following …

… HAZARDOUS MANUAL TASKS To implement the most effective controls you should: • Start at the top of the hierarchy of control. • Enable workers to trial controls and give their feedback before … contain more information: • Communicate the reasons for the change to workers and others. • Code of Practice – Hazardous Manual Tasks • Work Health and Safety Regulation 2017 • Ensure that any …

Safety Checklist: Earthmoving Plant in Construction 2022 cover

Name

Safety Checklist: Earthmoving Plant in Construction

Publisher

SafeWork NSW

Version: 2022. (Current)

This checklist can be used by principal contractors and site supervisors to manage the risks of earthmoving plant activities on construction sites.

2 results

… This checklist can be used by principal contractors and site supervisors to manage the risks of earthmoving plant activities on construction sites. Principal contractors (PCs) and people … intended to be exhaustive, and reference should be made to appropriate legislation, standards, Codes of Practice and Guides. On-the-spot fines of up to $3,600 for businesses may be issued to those …

… Further Information Safety information SafeWork NSW SafeWork Australia Before You Dig Australia Codes of practice Excavation Work Code of Practice Managing risks of plant in the workplace code of …

Name

Mould at work

Publisher

SafeWork NSW

Version: 2020. (Current)

Mould at the workplace can be a serious health and safety hazard that could be putting your workers at risk.

1 results

… Technical help and resources Codes of Practice and Guidance For more information about the risk management process see Code of Practice for How to manage work health and safety risks For more information about the …

Page 10

Name

Tower Crane Safety for PCBU’s

Publisher

SafeWork NSW

Version: 2022. (Current)

This checklist can be used by principal contractors and site supervisors to manage the risks of tower crane activities on construction sites.

2 results

… This checklist can be used by principal contractors and site supervisors to manage the risks of tower crane activities on construction sites. Principal contractors and builders have a duty … intended to be exhaustive and reference should be made to appropriate legislation, standards, Codes of Practice and Guides. On-the-spot fines of up to $3,600 for businesses and $720 for individuals …

… (Is it fenced/hoarded and warning signs) Are there controls in place to minimise the risk of workers and others from being struck by falling objects from tower crane loads? (Is a … Safe Work Australia ‘Guide to Tower Cranes’ Safe Work Australia ‘General guide to cranes’ Codes of practice Work near overhead powerlines code of practice Managing risks of plant in the workplace …

Scaffolding Industry Safety Standard cover 2022

Name

Scaffolding Industry Safety Standard

Publisher

SafeWork NSW

Version: 2022. (Current)

The purpose of this document is to provide practical management tools to principal contractors, scaffolders, engineers, and other parties responsible for the provision and safe use of scaffolding.

2 results

… Consultation is a legal requirement under WHS legislation and is covered in detail in the NSW Code of Practice, Work health and safety consultation, cooperation and coordination. Consultation …

Page 16

Page 37

… exceeded. Clear communication among all parties has been proven to provide earlier indicators of circumstances or potential problems with scaffold activities, which may then be resolved … of scaffold terminology and construction. Further detailed guidance may be found in the NSW Code of practice Work Health And Safety Consultation, Cooperation and Coordination August 2019. The …

Livable Housing Design Standard 2022 cover

Name

Livable Housing Design Standard

Publisher

Australian Building Codes Board

Version: 2022. (Current)

Provides a set of technical provisions that if complied with will enable dwellings to better meet the needs of the community, including older people and people with mobility limitations

1 results