Search all content

Current document versions only

311 - 320 of 887 results

Dangerous Goods (Road and Rail Transport) Act 2008 cover

Name

Dangerous Goods (Road and Rail Transport) Act 2008 No 95 (NSW)

Publisher

NSW Government

Version: 2008. (Current)

An Act to make provision for safety in the transport of dangerous goods by road and rail as part of the system of nationally consistent road and rail transport laws; and for other purposes. (NSW legislation.)

4 results

found in this document show

Page 5

… 42 62 Proof of appointments and signatures unnecessary ........................................................................ 42 63 Use of codes of practice etc in proceedings … 46 70 Minister to notify adoption of code etc …

Page 25

… to a person would not be appropriate to avert, eliminate or minimise the danger, the authorised officer may take or cause to be taken any action the authorised officer believes on reasonable … (2) Any such direction may— (a) adopt, by reference, the requirements of any industry or other code of practice or standard, and (b) offer the person to whom it is issued a choice of ways in which to …

Page 42

… or licensing by a Competent Authority. 60 Evidence regarding weighing For the purposes of this Act, evidence of a record made by— (a) the operator of a weighbridge or weighing … signature of an authorised officer is evidence of the signature it purports to be. 63 Use of codes of practice etc in proceedings (1) This section applies to a code of practice, guideline or other …

Page 43

… Dangerous Goods (Road and Rail Transport) Act 2008 No 95 [NSW] (c) either— (i) the code of practice, guideline or other document has been published in the Gazette, or (ii) copies of the …

HB 276-2004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling and Air Conditioning Plant and Equipment 2004 cover

Name

HB 276-2004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling and Air Conditioning Plant and Equipment

Publisher

Standards Australia

Version: First Edition 2004. (Current)

Applies to heating, cooling and air conditioning systems installed in all Class 1a, 1b, 2, 3 and 4 buildings as defined in the Building Code of Australia; classifications include single dwellings and multi-storey residential buildings; this is for all work associated with the design, supply, installation, testing and commissioning of all heating, cooling and air conditioning plant and systems associated with the above residential buildings.

4 results

found in this document show

Page 6

… 1 1.1 FOREWORD OBJECTIVE OF THE GUIDE To enable all the correct requirements to be considered for the installation of … publication: • The Guide will cover Class 1, 2, 3 and 4 buildings, as deﬁned by the Building Code of Australia (BCA) • The duty of care of the building owner will not be part of this Guide … of the Building Commission will be considered and, if required, referenced. 4 Guide to Good Practice for Energy Efﬁcient Installation of Residential Heating, Cooling and Air Conditioning …

Page 7

… A Guide to Good Practice 2 2.1 ACKNOWLEDGEMENTS INDUSTRY PUBLICATIONS & HANDBOOKS Australian Institute of Refrigeration, Air Conditioning and Heating – Application Manuals Australian Gas Association … Ventilating Contractors Association – Guide to Good Practice Plumbing Industry Commission – A Code of Good Practice for Servicing, Maintenance and Recommissioning HVAC Innovations Software …

Page 8

… 3 GENERAL Continued The legislation, generally, provides the statutory obligations of employers and employees with respect to the security and protection for their health and … Means a mandatory requirement of this Guide. Should Indicates a recommended requirement of this Code, which is the Plumbing Industry Commission’s preferred option. Spread The horizontal angle … that is a class 5, 6, 7, 8 or 9 if it is the only dwelling in the building Guide to Good Practice for Energy Efﬁcient Installation of Residential Heating, Cooling and Air Conditioning …

Page 55

… A Guide to Good Practice 7 INSTALLATION REQUIREMENTS Continued Duct penetration - Tiled roof details Note: To be read in conjunction with standards Australia Handbook HB39 – Code of Common Practice for Steel Rooﬁng Guide to Good Practice for Energy Efﬁcient Installation …

AS 3833:2024 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers 2024 cover

Name

AS 3833:2024 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers

Publisher

Standards Australia

Version: First Edition 2024. (Current)

Provides minimum acceptable safety requirements for installations where more than one class of dangerous goods is stored and handled, whether in packages or intermediate bulk containers (IBCs) of up to 1.6 m3 capacity.

7 results

found in this document show

Page 11

… Australian Standard® AS 3833:2024 1 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers Section 1 1.1 … of Dangerous Goods — Model Regulations. They are also listed in the Australian Dangerous Goods Code (ADG Code). NOTE 2 An outline of the classes and divisions of dangerous goods is provided in Appendix A. NOTE 3 SafeWork Australia Model Code of Practice “How to manage work health and safety risks” should also be consulted regarding risk …

Page 15

… purpose containers (ISO 1496‑1:2013, MOD) AS/NZS 4081, The storage, handling and transport of liquid and liquefied polyfunctional isocyanates AS/NZS 4360, Risk management AS/NZS 4452, The … Systems UNECE. Manual of Tests and Criteria National Transport Commission (Australia). ADG Code, Australian Code for the Transport of Dangerous Goods by Road and Rail Australian Building … Poisons Safe Work Australia, Managing risks of hazardous chemicals in the workplace — Code of Practice (June 2023) Safe Work Australia, Preparation of safety data sheets for hazardous …

Page 24

… AS 3833:2024 14 1.4.55 regulatory authority authority responsible for administration of control of the storage, transport and use of dangerous goods Note 1 to entry: More than one … handling of a specific chemical product, and which conforms with Safe Work Australia’s Model Code of Practice — Preparation of safety data sheets for hazardous chemicals Note 1 to entry: Safety …

Page 60

… 7.2.10 50 Packagings for dangerous goods The following requirements apply to the packaging of dangerous goods: (a) Where the packaging is to be used at the premises as which it is filled, … premises other than that where it is filled, it shall meet the relevant requirements of the ADG Code. Marking of packages Packages for dangerous goods shall be marked in accordance with the … which contains marking requirements for consumer products. (b) The Safework Australia Code of Practice for Labelling of Workplace Hazardous Chemicals for hazardous chemicals at the …

Page 85

… paragraphs outline the risks that need to be considered when planning a store for mixed classes of dangerous goods. A thorough risk assessment can help to detect and correct any potentially … and reduced in accordance with state-based regulations. NOTE SafeWork Australia Model Code of Practice “How to manage work health and safety risks” provides information on how to conduct a …

Page 87

… 3833:2024 77 picking any pallet (whether including dangerous goods or otherwise) on the top row of racking” rather than “using forklift”. Three elements are then involved— (a) identification … consequences); and NOTE The process for risk assessment is set out in Safe Work Australia Model Code of Practice “How to manage work health and safety risks”. © Standards Australia Limited 2024 …

Page 99

… is available from the Australian Flexible Intermediate Bulk Container Association (AFIBCA) Code of Practice. When lifting from the top— (a) (b) ensure all forklift tines, crane hooks, bars or …

Work Health and Safety Regulation 2011 (QLD) 2011 cover

Name

Work Health and Safety Regulation 2011 (QLD)

Publisher

Queensland Government

Version: 2011. (Current)

This regulation may be cited as the Work Health and Safety Regulation 2011. (QLD legislation.)

3 results

found in this document show

Page 604

… 9 744 Asbestos related provisions Definitions for div 9 In this division— asbestos management code means former NOHSC document entitled ‘Code of Practice for the Management and Control of Asbestos in Workplaces [NOHSC:2018 (2005)]’. bonded …

Page 710

… Work Health and Safety Regulation 2011 Schedule 15 of animals tested must be sufficient to give a statistically significant result and be in conformity with good pharmacological practice. The result is expressed in milligrams per kg body mass. Packing Group has the same meaning as in the ADG Code. subsidiary risk has the same meaning as in the ADG Code. 2 Relevant hazardous chemicals …

Page 763

… mesh, for part 6.4, division 3, see section 315D. mixture, for part 7.1, means a combination of, or a solution composed of, 2 or more substances that do not react with each other. mobile … by NATA, or recognised by NATA either solely or with someone else. national labelling code means the document titled ‘National Code of Practice for the Labelling of Workplace Substances [NOHSC: 2012 (1994)]’, declared by the …

AS/NZS 1596:2014 The storage and handling of LP Gas 2014 cover

Name

AS/NZS 1596:2014 The storage and handling of LP Gas

Publisher

Standards Australia/Standards New Zealand

Version: Fourth Edition 2014. (Pending Revision)

Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.

8 results

found in this document show

Page 9

… AUSTRALIA/STANDARDS NEW ZEALAND Australian/New Zealand Standard The storage and handling of LP Gas SECTI ON 1 SCOPE AND GENERAL 1.1 SCOPE AND OBJECTIVE This Standard specifies … series. (g) Land transport equipment and operations, as covered— (i) in Australia, by the ADG Code (but excluding references to this Standard that appear in the ADG Code) and AS 2809, Parts … Hazardous Substances (Tank Wagons and Transportable Containers) Regulations 2004. The Code of Practice HSNOCOP 29, Flammable Gases and Oxygen Tank Wagons—A code of practice for the design …

Page 22

… Transfer Notice and amendments. 1.4.61 Tanker A road tank vehicle that meets the requirements of AS 2809.1 and AS 2809.3, or with earlier Standards superseded by AS 2809.3, or with the New Zealand Environmental Protection Authority (EPA) Approved Code of Practice for ‘Flammable Gases and Oxygen Tank Wagons’. 1.4.62 Thermal screen A wall or other …

Page 31

… 29 SECTI ON 4 CYLINDE RS AND SYSTE M S AS/NZS 1596:2014 CYL I NDER 4.1 SCOPE AND APPLICATION OF SECTION This Section provides requirements and recommendations for the location, design and … cylinders shall conform with the New Zealand Environmental Protection Authority (EPA) Approved Code of Practice, In-situ Filling of LPG Cylinders, available from the Liquefied Petroleum Gas …

Page 41

… 1596:2014 4.4.12 Additional requirements for cylinders for in situ filling An installation of cylinders intended for in situ filling shall comply with the following requirements: (a) … cylinders shall conform to the New Zealand Environmental Protection Authority (EPA) Approved Code of Practice HSNOCOP 38, ‘In-situ Filling of LPG Cylinders’ available from the LPGA. 4.5 CYLINDER …

Page 87

… 85 AS/NZS 1596:2014 SECTI ON 9 CYLINDE R FILLING INSTALLATI ONS  NE W ZEAL AND 9.1 SCOPE OF SECTION This Section provides requirements for installations for the filling of cylinders … or (b) A cylinder mounted on any other type of vehicle; or (c) A cylinder operating under a code of practice approved by the New Zealand Environmental Protection Authority (EPA) relating to …

Page 105

… 103 SECTI ON 11 AS/NZS 1596:2014 OPE RATIONS 11.1 SCOPE OF SECTION This Section sets out procedures for the operation and upkeep of an LP Gas … Requirements Where LP Gas is to be transported, handled, or stored, the requirements of the ADG Code/The New Zealand Land Transport Rule Dangerous Goods and this Section shall be satisfied. … NZS 5263:2003 (Gas detection and odourization); or (b) odourized in accordance with a code of practice approved by the authority. 4 The possibility of odour fade should be considered …

Page 131

… 129 AS/NZS 1596:2014 AS/NZS A1 2832 2832.1 Cathodic protection of metals Part 1: Pipes and cables 2865 3000 Safe working in a confined space Electrical … Transport of dangerous goods on land 5435 Specification for liquefied petroleum gas (LPG) 5807 Code of practice for industrial identification by colour, wording or other coding NZS/AS 1657 NZS/BS 750 …

Page 133

… 131 AS/NZS 1596:2014 US DEPARTMENT OF TRANSPORTATION Hazardous Materials Regulations NEW ZEALAND Statutes Hazardous Substances and … Transportable Containers) Regulations 2004 Land Transport Rule: Dangerous Goods 2005 Approved Codes of Practice HSNOCOP 29—Flammable Gases and Oxygen Tank Wagons LPG Compliance 100 kg to 300 kg …

Working with crystalline silica and crystalline silica containing products: Guidance material 2024 cover

Name

Working with crystalline silica and crystalline silica containing products: Guidance material

Publisher

Safe Work Australia

Version: 2024. (Current)

Use this guide if you are a person conducting a business or undertaking (PCBU) who has workers (including yourself) that work with materials or products containing crystalline silica, including any permitted work with engineered stone.

7 results

found in this document show

Page 8

… to meet your duties and obligations under WHS laws. You should also read the following:  model Code of Practice: How to manage work health and safety risks, and  model Code of Practice: Construction …

Page 12

… 2.5 Workers WHS Act section 28 Duties of workers Workers have a duty to take reasonable care for their own health and safety, and to … your WHS regulator. Further information on work health and safety duties is in the model Code of Practice: How to manage work health and safety risks. Guidance Material Working with crystalline …

Page 14

… 3.1 Consulting with workers WHS Act section 47 Duty to consult workers WHS Act section 48 Nature of consultation You must consult, so far as is reasonably practicable, with your workers and … any changes that may result. Further information on consultation requirements is in the model Code of Practice: Work health and safety consultation, co-operation and co-ordination. 3.2 The risk …

Page 15

… hazards—find out what could cause harm.  Assess risks, if necessary—understand the nature of the harm that could be caused by the hazard, how serious the harm could be and the likelihood … suitability of control measures. Further information on the risk management process is in the Code of Practice: How to manage work health and safety risks. 3.3 Identify the hazards To manage risks …

Page 18

… If you have identified RCS at your workplace or identified that it may be generated as part of your work practices, you should consider:  how, where and for how long workers could be exposed to RCS,  … the permissible workplace exposure standard. For further information, please refer to the model Code of Practice: Construction work. Take action to control the risks As a PCBU, you must …

Page 25

… and uniforms must be cleaned frequently to stop RCS from contaminating break rooms, other parts of the workplace and importantly, to stop workers from taking RCS home. More information about facilities at your workplace can be found in the model Code of Practice: Managing the work environment and facilities. Personal protective equipment Personal …

Page 30

… Ventilation is a very effective engineering control when designed correctly. There are a range of different ventilation systems and you need to use the ones that suit your workplace and the … More information about ventilation and other engineering controls can be found in the model Code of Practice: Managing risks of hazardous chemicals in the workplace. Figure 5 A worker …

Building Regulations 1993 (NT) 1993 cover

Name

Building Regulations 1993 (NT)

Publisher

Northern Territory of Australia

Version: 1993. (Current)

These regulations may be cited as the Building Regulations 1993. (NT legislation.)

2 results

found in this document show

Page 8

… Part 1 Preliminary matters (ii) one or more storeys that are Class 7a buildings for the sole use of the residents of, and visitors to, the Class 2 buildings. Code of Practice for Wastewater Management means the Code of Practice for Wastewater Management …

Page 11

… Part 2 Division 1 Building standards General provisions (2) Sections 55 and 65 of the Act do not apply to or in relation to: 3B (a) any building classified as a Class 10 … the approved form of the relevant building practitioner that the work conforms to the relevant code or standard. Exemption from section 62 of the Act Section 62 of the Act does not apply to a … the Act or in the Building Code: (a) the Building Code; (b) the Plumbing Code; (c) the Code of Practice for Wastewater Management. (1A) If there is any inconsistency between the Code of …

Construction Workforce’s Mental Health: Research and Policy Alignment in the Australian Construction Industry 2023 cover

Name

Construction Workforce’s Mental Health: Research and Policy Alignment in the Australian Construction Industry

Version: 2023. (Current)

The Australian construction industry is facing a mental health crisis; poor mental health indicators are significantly higher than the all-industry average. This paper addresses the knowledge gap by reporting the results of a systematic review of peer-reviewed mental health research and reveals significant misalignment between existing research and Australian government regulation.