Search all content

511 - 520 of 537 results
AS/NZS 1163:2009 Cold-formed structural steel hollow sections 2009 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2009.  (Superseded)
Specifies requirements for cold-formed steel hollow sections for structural purposes, for the nine grades electric arc-welded, cold-formed structural steel hollow sections.
AS/NZS 61241.1.2:2000 Electrical apparatus for use in the presence of combustible dust, Part 1.2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance 2000 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2000.  (Superseded)
Gives guidance on the selection, installation and maintenance of electrical apparatus for use in areas where combustible dusts are or may be present, in quantities which could lead to a fire or explosion hazard.
AS/NZS 1158.3.1:2005 Lighting for roads and public spaces, Part 3.1: Pedestrian area (Category P) lighting - Performance and design requirements 2005 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2005.  (Available Superseded)
Specifies performance and design requirements for Category P lighting schemes as described in AS/NZS 1158.0. Also specifies data needed to design for and assess compliance with those requirements.
AS/NZS 1050.20:1994 Methods for the analysis of iron and steel, Part 20: Determination of magnesium content - Flame atomic absorption spectrometric method 1994 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1994.  (Current)
Specifies a flame atomic absorption spectrometric method for the determination of magnesium content between 0.010 percent and 0.25 percent in all types of iron and steel.
AS/NZS 1050.27:1994 Methods for the analysis of iron and steel, Part 27: Determination of titanium content - Spectrophotometric method 1994 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 1994.  (Current)
Specifies a spectrophotometric method using diantipyrylmethane as a chromogen, measured spectrophotometrically at 390 nm. The method can be used for the determination of titanium content between 0.005 percent and 1.20 percent in steel.
AS/NZS 2107:2000 Acoustics - Recommended design sound levels and reverberation times for building interiors 2000 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2000.  (Available Superseded)
Recommends design sound levels and reverberation times for different areas of occupancy in various categories of buildings. Specifies methods of measuring the ambient sound level reverberation time. This Standard is intended for use in assessing the acoustic performance of buildings and building services. It does not apply to the evaluation of occupancy noise.
AS/NZS 1050.32:1994 Methods for the analysis of iron and steel, Part 32: Determination of carbon content - Infrared method 1994 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1994.  (Current)
Specifies an infrared method for the determination of carbon in iron and steel after combustion in oxygen using high frequency induction heating. The method is applicable to all types of iron and steel with carbon content in the range 0.002 percent to 4.5 percent carbon.
AS/NZS 3499:2006 Water supply - Flexible hose assemblies 2006 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Superseded)
Specifies requirements for flexible hose assemblies for use with both heated and cold water supplies with a maximum heated water temperature of 90 degrees Celsius, used for applications aboveground, accessible and not submerged. Nominal sizes range up to DN 20, a maximum length of 2 m and with a working pressure not exceeding 1.4 MPa at 20 degrees Celsius.
AS/NZS 4063.2:2010 Characterization of structural timber, Part 2: Determination of characteristic values 2010 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2010.  (Pending Revision)
Provides requirements for the sampling, statistical evaluation of test data and the determination of design characteristic values for structural timber for structural design in accordance with the relevant Australian or New Zealand timber engineering design Standard.
AS/NZS 1577:2018 Scaffold decking components 2018 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2018.  (Current)
Specifies requirements for the design and manufacture of scaffold decking components, and their performance requirements when used to form working platforms for scaffolds. Decking components comprise scaffold planks, deck infills, lap plates and prefabricated platforms.