Search all content

AS 4055:2021 is amended as follows. The amendments should be inserted in the locations as instructed.

Sets out requirements and guidelines for the long term type testing, glazing, periodic manufacturing testing and other associated aspects to do with insulating glass units.

Sets out the quality requirements for cut sizes of flat, transparent, clear ordinary annealed, tinted heat-absorbing, patterned and wired glass for general glazing and/or further processing.

Specifies the design requirements for new building work, as required by the National Construction Code (NCC) and the Disability (Access to Premises—Buildings) Standards (Premises Standards), to provide access for people with disabilities.

This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee EL-002 - Safety of Household and Similar Electrical Appliances and Small Power Transformers to supersede AS/NZS 60335.2.94:2008 three years from the date of publication of this Standard. During this period AS/NZS 60335.2.94:2008 will also remain current. Regulatory authorities that reference this Standard in regulation may apply these requirements at a different time. Users of this Standard should consult with these authorities to confirm their requirements.

This Standard sets out a qualitative method for the detection of sugar in aggregates intended for use in the production of concrete. A positive reaction is given by one part of sugar in one thousand parts of aggregates. No visible reaction is given by one part of sugar in 10 000 parts of aggregates.

This Standard was prepared to supersede AS/NZS 4456.0:1997. The test methods are grouped into the following categories: - Tests that relate to minimum performance requirements. - Tests that are optional and intended to be specified as appropriate.

This Standard sets out the method for the determination of the degradation factor of rock spalls and drill cores. The test categorizes the fines produced by self-abrasion in the presence of water.

This Standard sets out the method for determining the polished aggregate friction value (PAFV) of naturally occurring or artificially produced materials which are intended to be used as, or to be a source of, pavement surfacing material.

This Standard sets out methods for testing masonry units, segmental pavers and flags, to determine their resistance to salt attack.