Search all content

591 - 600 of 2412 results
AS 1141.30.1:2022 Methods for sampling and testing aggregates, Method 30.1: Coarse aggregate quality by visual comparison 2022 cover

Standards Australia

Version:  Second Edition 2022.  (Current)
AS 1141.30.1 sets out the method for determining a quality classification of coarse aggregate by visual comparison with pre-prepared reference specimens.
AS 1141.11.2:2019 Methods for sampling and testing aggregates, Method 11.2: Particle size distribution for vision sizing systems 2019 cover

Standards Australia

Version:  Second Edition 2019.  (Current)
This Standard sets out the method for the determination of particle size distribution in coarse and fine aggregates by vision sizing systems (VSS). The VSS is limited by the discrimination of the optical system and, at present, is suitable for materials coarser than 1.18 mm.
AS 1735.8-1986 Lifts, escalators and moving walks (known as the SAA Lift Code), Part 8: Inclined lifts 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Pending Revision)
Sets out requirements for power-operated inclined lifts of the car or platform type for public and private use, other than stairway lifts, temporary lifts, or hoists used solely for building work, and amusement devices.
AS 2350.15-1995 Methods of testing portland and blended cements, Method 15: Water-soluble chromate content of portland cement 1995 cover

Standards Australia

Version:  First Edition 1995.  (Current)
This Standard sets out the method for determining water soluble chromate in portland cement.
AS/NZS 2111.0:1996 Textile floor coverings - Tests and measurements, Part 0: Introduction and list of methods 1996 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1996.  (Current)
The objective of this Standard is to provide manufacturers and others seeking to determine certain performance and size characteristics of a textile floor covering with suitable methods for obtaining this information.
AS/NZS 2350.17:2006 Methods of testing portland, blended and masonry cements, Method 17: Determination of soundness of masonry cement 2006 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Current)
This Standard sets out the method for determining the soundness of masonry cements using a paste of normal consistency.
AS 2796.1-1999 Timber - Hardwood - Sawn and milled products, Part 1: Product specification 1999 cover

Standards Australia

Version:  First Edition 1999.  (Current)
Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and end-matching. Guidance is given on information to be supplied when ordering.
AS/NZS 2350.8:2006 Methods of testing portland, blended and masonry cements, Method 8: Fineness index by air permeability method 2006 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Current)
This Standard describes the reference method for determining the fineness index of cement by the air permeability method, expressed in terms of surface area in square metres per kilogram of cement determined at a temperature of 23 ±2°C.
AS 1576.3:2015 Scaffolding, Part 3: Prefabricated and tube-and-coupler scaffolding 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Specifies product information to be included with and test and performance requirements for prefabricated and tube-and-coupler scaffolding.
AS 1012.16-1996 Methods of testing concrete, Method 16: Determination of creep of concrete cylinders in compression 1996 cover

Standards Australia

Version:  Second Edition 1996.  (Current)
Specifies procedures for determining the creep of standard concrete test cylinders subjected to a sustained longitudinal compressive load.