Search all content

1 - 10 of 43 results
SA TS 5344:2019 Permanent labelling for Aluminium Composite Panel (ACP) products 2019 cover

Standards Australia

Version:  First Edition 2019.  (Current)
This Technical Specification sets out requirements for the permanent marking of Aluminium Composite Panels (ACPs).
SA TS 101:2015 Design of post-installed and cast-in fastenings for use in concrete 2015 cover

Standards Australia

Version:  First Edition 2015.  (Available Superseded)
Building Bill 2023 - Licensing Proposals 2023 cover

NSW Government

Version:  2023.  (Current)
To inform development of the Regulations, the Department has reviewed the current extended descriptions of work for each licence class to ensure they reflect modern industry practices.
Technical Bulletin 1001: When to Heat Soak 2021 cover

Australian Glass Group

Version:  2021.  (Current)
Explains heat soaked glass on buildings.
Technical Bulletin 1002: Glass Surface numbering and coatings 2024 cover

Australian Glass Group

Version:  2024.  (Current)
Explains glass surface numbering, and on which surface to specify different types of glass coatings.
Technical Bulletin 1015: Standoff fixing layout guidance 2021 cover

Australian Glass Group

Version:  2021.  (Current)
Illustrates the capability of AGG Tempershield® monolithic toughened glass and Skyglass® toughened laminate when used with 50mm diameter standoff patch fixings.
Technical Bulletin 1005: Silicone Butt Joints 2021 cover

Australian Glass Group

Version:  2021.  (Current)
Considers single and double glazing.
Technical Bulletin 1006: IGU Installation 2021 cover

Australian Glass Group

Version:  2021.  (Current)
Explains Insulating Glass Units handling and installation.
Technical Bulletin 1008: Inspection of Glass Defects 2021 cover

Australian Glass Group

Version:  2021.  (Current)
Explains how to inspect glass for imperfections.
Technical Bulletin 1009: Wind Actions 2021 cover

Australian Glass Group

Version:  2021.  (Current)
Determines whether to use AS/NZS 1170.2 (Commercial) or AS 4055 (Residential), and if loads provided by the client, main contractor, or specifier are relevant.