Search all content

311 - 320 of 584 results
AS/NZS 3582.3:2016 Supplementary cementitious materials, Part 3: Amorphous silica 2016 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2016.  (Current)
The objective of this Standard is to set out the requirements for amorphous silica for use as a cementitious material in concrete, mortar and related applications.
AS/NZS 1050.21:1994 Methods for the analysis of iron and steel, Part 21: Determination of cobalt content - Spectrophotometric method 1994 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1994.  (Current)
Specifies a spectrophotometric method for the determination of cobalt content up to 12 percent in all grades of iron and steel containing less than 10.0 percent copper. The sample is dissolved in acid and nitroso-R-salt added. This forms a red-brown chromophore which is measured spectrophotometrically at 580 nm.
AS/NZS 1050.27:1994 Methods for the analysis of iron and steel, Part 27: Determination of titanium content - Spectrophotometric method 1994 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 1994.  (Current)
Specifies a spectrophotometric method using diantipyrylmethane as a chromogen, measured spectrophotometrically at 390 nm. The method can be used for the determination of titanium content between 0.005 percent and 1.20 percent in steel.
AS/NZS 2350.18:2006 Methods of testing portland, blended and masonry cements, Method 18: Determination of water retention of masonry cement 2006 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Current)
This Standard sets out the method for determining the water retention of a masonry cement prepared and tested as a standard mortar.
AS/NZS 1050.6:1995 Methods for the analysis of iron and steel, Part 6: Determination of tin content - Flame atomic absorption spectrometric method 1995 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1995.  (Current)
Specifies a flame atomic absorption spectrometric method for the determination of tin content of iron and steel. The sample is digested in acid, the tin extracted into trioctyl phosphine oxide in 4-methylpentan-2-one (MIBK) and then aspirated into a nitrous oxide/acetylene flame of an atomic absorption spectrometer. The absorption is measured at 235.5 nm.
AS/NZS 1270:2002 Acoustics - Hearing protectors 2002 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2002.  (Current)
Specifies requirements for the design, material and performance of conventional hearing protectors. Also provides guidance on the general requirements for specialist hearing protectors and procedures for the physical and acoustic testing of such devices.
AS/NZS 2098.6:2006 Methods of test for veneer and plywood, Method 6: Depth of peeler checks in veneer and plywood 2006 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Current)
This Standard sets out the method for determining the depth of peeler checks in veneer and plywood.
AS/NZS 2350.1:2006 Methods of testing portland, blended and masonry cements, Method 1: Sampling 2006 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Current)
Describes methods and provisions to be complied with for taking samples of cement representative of given lots for testing to assess the quality of products prior to, during or after delivery.
AS/NZS 2098.5:2006 Methods of test for veneer and plywood, Method 5: Resistance of gluelines in plywood to attack by micro-organisms 2006 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2006.  (Current)
This Standard sets out the method for determining the resistance of gluelines in plywood to attack by micro-organisms.
AS/NZS 4347.5:1995 Damp-proof courses and flashings - Methods of test, Method 5: Determination of compression properties 1995 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1995.  (Current)
This Standard sets out the method of determining the compressive elastic modulus and compression set of a damp-proof course of nominal thickness not less than 5 mm.